Excavator Rotating Demolition & Sorting Grab, Bolt-On Edge, 5–30T

Get a quote or call 1300 441 121

Rotating demolition and sorting grab with a double-sided bolt-on edge and wide gathering jaws.

The flat bolt-on edge sorts very fine material, and the wide jaws bunch loose rubbish as they close. Continuous 360° rotation with a Danfoss motor, NM400 jaws with slotted shells, and guarded 5,000 psi cylinders. Three sizes for 5 to 30 tonne excavators, from $11,990 ex GST, with the head bracket, hoses and couplers. 2-year warranty, including the rotator motor and valving.

Fully backed, serviced, in stock and ready to go. In stock, usually dispatched same day from Burnside.

Model5–8T demolition grab12–16T demolition grab20–30T demolition grab
Excavator size5–8 tonnes12–16 tonnes20–30 tonnes
Weight320 kg900 kg1,800 kg
Maximum jaw opening1,100 mm1,800 mm2,250 mm
Jaw width500 mm850 mm1,050 mm
JawsPaddle-style gathering jaws with slotted shells, NM400 (400 grade) steelPaddle-style gathering jaws with slotted shells, NM400 (400 grade) steelPaddle-style gathering jaws with slotted shells, NM400 (400 grade) steel
Cutting edgeDouble-sided, bolt-onDouble-sided, bolt-on, 840 × 175 × 20 mm, M16 bolts (4 per side)Double-sided, bolt-on, 1,050 × 200 × 25 mm, M20 bolts (8 per side)
RotationContinuous 360°, Danfoss rotation motorContinuous 360°, Danfoss rotation motorContinuous 360°, Danfoss rotation motor
CylinderGuarded, rated to 5,000 psiGuarded, rated to 5,000 psiGuarded, rated to 5,000 psi
ValvingCross port relief valveCross port relief valveCross port relief valve
Jaw circuit flow40–65 L/min75 L/min90 L/min
Rotation circuit flow12–18 L/min12–18 L/min12–18 L/min
Auxiliary circuitsTwo: one for the jaws, one for rotationTwo: one for the jaws, one for rotationTwo: one for the jaws, one for rotation
Case drainNot neededRequiredRequired
IncludedHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplers
Warranty2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)
Price (ex GST)$11,990$18,990$26,990

The AR Equipment rotating demolition sorting grab is the specialist for demolition, waste sorting and recycling. A flat, double-sided bolt-on cutting edge closes to a fine pinch point for sorting very fine material, and the wide jaw opening and wide gathering jaws bunch loose material like rubbish very well as they close. Continuous 360° rotation on a Danfoss motor lines the jaws up without moving the machine.

Three sizes: 5–8T at $11,990, 12–16T at $18,990 and 20–30T at $26,990, all ex GST, with the head bracket, hoses and couplers. Fully backed, serviced, in stock and ready to go.

Demolition grab specifications

Model5–8T demolition grab12–16T demolition grab20–30T demolition grab
Excavator size5–8 tonnes12–16 tonnes20–30 tonnes
Weight320 kg900 kg1,800 kg
Maximum jaw opening1,100 mm1,800 mm2,250 mm
Jaw width500 mm850 mm1,050 mm
JawsPaddle-style gathering jaws with slotted shells, NM400 (400 grade) steelPaddle-style gathering jaws with slotted shells, NM400 (400 grade) steelPaddle-style gathering jaws with slotted shells, NM400 (400 grade) steel
Cutting edgeDouble-sided, bolt-onDouble-sided, bolt-on, 840 × 175 × 20 mm, M16 bolts (4 per side)Double-sided, bolt-on, 1,050 × 200 × 25 mm, M20 bolts (8 per side)
RotationContinuous 360°, Danfoss rotation motorContinuous 360°, Danfoss rotation motorContinuous 360°, Danfoss rotation motor
CylinderGuarded, rated to 5,000 psiGuarded, rated to 5,000 psiGuarded, rated to 5,000 psi
ValvingCross port relief valveCross port relief valveCross port relief valve
Jaw circuit flow40–65 L/min75 L/min90 L/min
Rotation circuit flow12–18 L/min12–18 L/min12–18 L/min
Auxiliary circuitsTwo: one for the jaws, one for rotationTwo: one for the jaws, one for rotationTwo: one for the jaws, one for rotation
Case drainNot neededRequiredRequired
IncludedHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplers
Warranty2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)
Price (ex GST)$11,990$18,990$26,990
Match the grab to your excavator’s weight and auxiliary circuits. Send us your make, model and pin size and we’ll confirm the size and hydraulic set-up before you order.

Built for demolition and waste work

Flat bolt-on cutting edge for fine sorting

The flat edge gives a fine pinch point, so you can pick small pieces and fine material out of a mixed pile instead of letting them slip through. The edge is double-sided and bolted on: turn it over when one side wears, and bolt on a new one when both are done, instead of rebuilding the jaw.

Wide gathering jaws

The jaws open wide and are shaped to gather as they close, so loose material like rubbish, timber offcuts and mixed waste gets bunched into the middle of the grab. You pick up more with every bite and drop less loading bins and trucks. The jaw shells are slotted, so dirt and fines drop through while you sort and you load cleaner material.

Danfoss rotation, quality ring gear and swivel joint

The componentry is high end: Danfoss rotation motors, high-quality ring gears and high-quality swivel joints. We only run Danfoss motors, because we couldn’t get the same longevity out of anything else. That’s what separates it from cheaper grabs: it’s built to compete with European and American-built grabs, which is why it costs more.

NM400 jaws and body

The jaws and body are NM400, a 400 grade wear-resistant steel. It’s what we found works best for abrasion resistance and for resisting dents and deformation when the grab is working in concrete, steel and rubble.

Guarded 5,000 psi cylinders

The cylinders are rated to 5,000 psi, like every AR Equipment hydraulic grab, and they’re guarded along with the hydraulics, so stray waste strikes don’t take out a cylinder or a hose. A cross port relief valve protects the circuit.

Hydraulic requirements

  • Auxiliary circuits: two, one for the jaws and one for rotation.
  • Jaw circuit flow: 40–65 L/min (5–8T), 75 L/min (12–16T), 90 L/min (20–30T).
  • Rotation circuit flow: 12–18 L/min on every size.
  • Case drain: required on the 12–16T and 20–30T, not needed on the 5–8T.
  • Cylinders: rated to 5,000 psi, with a cross port relief valve.
  • Supplied: head bracket, hoses and couplers.

Our demolition grab against a typical budget sorting grab

AR Equipment rotating demolition sorting grabTypical budget sorting grab
Rotation motorDanfoss, with high-quality ring gear and swivel jointOften an unbranded motor
Jaw steelNM400 (400 grade) jaws and body for abrasion and dent resistanceOften mild or lower-grade steel
Cutting edgeDouble-sided, bolt-on: flip it, then replace itOften welded on, or none
Fine materialFlat bolt-on edge gives a fine pinch pointGaps let fine material slip
CylinderGuarded, rated to 5,000 psiOften exposed
Jaw shellsSlotted, so dirt and fines drop through while you sortOften solid
Parts and serviceCutting edges, bash plates, cylinders and motors on the shelf at Burnside, with our own machine shopDepends on the seller

Which size suits your excavator?

  • 5–8T: 5 to 8 tonne excavators. 320 kg, 1,100 mm opening. No case drain needed. $11,990 ex GST.
  • 12–16T: 12 to 16 tonne excavators. 900 kg, 1,800 mm opening. Case drain required. $18,990 ex GST.
  • 20–30T: 20 to 30 tonne excavators. 1,800 kg, 2,250 mm opening. Case drain required. $26,990 ex GST.
  • Not sure? Send us your make, model and pin size and we’ll confirm the size and hydraulic set-up.

Where it works

  • Demolition sites: pulling apart and separating timber, steel and masonry
  • Waste transfer stations and recycling yards: sorting mixed waste into streams
  • Picking fine material and small pieces out of a pile
  • Loading loose rubbish into bins, skips and trucks
  • Scrap yards: sorting and loading scrap
  • Site clean-ups after demolition

Spare parts

PartSuitsPart codePrice (ex GST)
Danfoss rotation motorDemolition grab and Gen 2SPKROTATINGMOTOR$2,250
Cutting edge with bolts (per edge)5–8TSPDGK5CUTEDGE$220
Cutting edge with bolts (840 × 175 × 20 mm, M16 × 4 per side)12–16TSPDGK12CUTEDGE$350
Cutting edge with bolts (1,050 × 200 × 25 mm, M20 × 8 per side)20–30TSPDGK20CUTEDGE$450
Bash plate5–8TSPDGK5BASHPLATE$150
Bash plate12–16TSPDGK12BASHPLATE$300
Bash plate20–30TSPDGK20BASHPLATE$350
Cylinder5–8TSPDGK5CYLINDER$1,400
Cylinder12–16TSPDGK12CYLINDER$2,150
Cylinder20–30TSPDGK20CYLINDER$2,450
Prices ex GST.

Videos

James from AR Equipment walks through the rotating demolition grab: Danfoss motor, ring gear, swivel joint and 400 grade jaws, with the grab working on M&K Earthmoving’s Komatsu.
The AR Equipment rotating demolition grab sorting and loading material.
A JCB JS20MH materials handler working with our grab. We work with machine dealers such as JCB.

In stock, well serviced and supported

Fully backed, serviced, in stock and ready to go. We’re fully backed here in Australia with parts and service, and we have a full machine shop at Burnside QLD. If you need a part, you can usually get it today, just like the grabs: in stock when you want one. In stock, usually dispatched same day from Burnside. Uncommon fitments built to order at our Burnside workshop take a little longer, and we’ll give you a date when you order.

Designed in Australia, assembled at Burnside

Designed and engineered in Australia, with final assembly at our Burnside QLD workshop. We’ve been building demolition grabs for 10 years. Over that time we’ve refined the design, engineered out the problems the early grabs had and sourced better components, and we’re really happy with where it’s landed.

Warranty

2-year warranty covering cylinder and structural failure, plus the rotator motor and valving. Hoses aren’t covered. Full terms are in our Terms and Conditions.

Talk to us

AR Equipment Pty Ltd, Burnside QLD. Supplying attachments since 2014, with over 50 years of combined experience. Call 1300 441 121, Monday to Friday 7:30am to 5:00pm, or request a quote on this page.

Also see our Gen 2 rotating grab, which rotating grab should I choose?, excavator magnets, concrete pulveriser and all excavator grabs.

Frequently asked questions

What is a rotating demolition sorting grab?

It’s a hydraulic grab for your excavator that opens, closes and rotates a full 360°. You use it to pull apart, sort and load demolition and waste material: timber, steel, masonry, rubble, scrap and loose rubbish. Rotation lets you line the jaws up with the load without moving the machine.

What’s the difference between a demolition grab and a sorting grab?

The names overlap. A sorting grab picks, separates and loads material that’s already down, and a demolition grab is built heavier to take the pulls and knocks of demolition. Ours is both: NM400 jaws and guarded cylinders for demolition, and a flat bolt-on edge and wide gathering jaws for sorting.

Demolition grab or Gen 2 rotating grab: which should I buy?

If most of your work is demolition, waste sorting and recycling, get the demolition grab. The flat bolt-on edge sorts very fine material and the wide gathering jaws bunch loose rubbish. If you want one grab for everything, including sandstone walls, land clearing and feeding chippers, the Gen 2 rotating grab is the all-rounder.

What size demolition grab do I need?

Match the grab to your excavator’s weight: the 5–8T grab suits 5 to 8 tonne excavators, the 12–16T suits 12 to 16 tonnes and the 20–30T suits 20 to 30 tonnes. Send us your make, model and pin size and we’ll confirm the size.

What is the bolt-on cutting edge for?

The flat edge closes to a fine pinch point, so you can pick small and fine material out of a pile instead of letting it slip through. It’s double-sided and bolted on, so when one side wears you turn it over, and when both sides are worn you bolt on a new edge rather than rebuilding the jaw.

Is it good for loading loose rubbish into bins and trucks?

Yes. The wide jaw opening and the wide gathering shape of the jaws bunch loose material together as they close, so you pick up more with each bite and drop less.

Does it rotate continuously?

Yes, continuous 360° rotation, driven by a Danfoss rotation motor with a high-quality ring gear and swivel joint. The Danfoss motor has its own built-in bearings.

Why Danfoss motors?

Longevity. We’ve tried others and couldn’t get the same life out of them, so every AR demolition grab runs a Danfoss rotation motor.

What steel are the jaws made from?

NM400, a 400 grade wear-resistant steel, on the jaws and body. We found it gives the best abrasion and dent resistance for demolition and waste work.

What are the cylinders rated to?

The cylinders are rated to 5,000 psi, the same as every AR Equipment hydraulic grab, and they’re guarded to protect them and the hoses from strikes by stray material. A cross port relief valve protects the circuit.

Does my excavator need a case drain?

The 12–16T and 20–30T grabs need a case drain: a low-pressure line that returns oil from the rotation motor’s case to the tank. The 5–8T grab doesn’t. If your machine doesn’t have a case drain return, have one fitted before the grab arrives.

What’s included?

The grab comes with the head bracket, hoses and couplers. Tell us your machine make, model and pin size so the head bracket and pins match your excavator.

How much hydraulic flow does it need?

Two auxiliary circuits: one for the jaws and one for rotation. The jaw circuit needs 40–65 L/min on the 5–8T, 75 L/min on the 12–16T and 90 L/min on the 20–30T. Rotation needs 12–18 L/min on every size. Send us your machine details and we’ll confirm the set-up.

Where is it made?

Designed and engineered in Australia, with final assembly at our Burnside QLD workshop.

Can it handle scrap metal?

Yes, sorting and loading scrap is everyday work for it. For picking up ferrous scrap in volume, also look at our excavator magnets.

Can a demolition grab crush concrete?

No. It grips, pulls apart, sorts and loads broken concrete and rubble, but it isn’t a crusher. For breaking concrete down, use a concrete pulveriser or rock breaker.

What warranty does it have?

2-year warranty covering cylinder and structural failure, plus the rotator motor and valving. Hoses aren’t covered. Full terms are in our Terms and Conditions.

Do you keep spare parts?

Yes. We keep cutting edges, bash plates, cylinders and Danfoss rotation motors on the shelf, and our machine shop at Burnside services and repairs what we sell. If you need a part, you can usually have it today.

How much does a demolition grab cost?

$11,990 ex GST for the 5–8T, $18,990 for the 12–16T and $26,990 for the 20–30T. You can spread the cost with the finance calculator on this page.

Can I hire one?

No, we don’t hire. Every AR attachment is sale only, in stock and ready to go.

Is it in stock and how fast can I get one?

Yes. In stock, usually dispatched same day from Burnside. Uncommon fitments built to order at our Burnside workshop take a little longer, and we’ll give you a date when you order.

How do I order?

Choose your excavator size and request a quote on this page, or call 1300 441 121, Monday to Friday 7:30am to 5:00pm. Tell us your machine make, model and pin size.

Which grab should I choose?

All four have cylinders rated to 5,000 psi. The difference is the job each one is built for.

Gen 2 rotating grabRotating demolition sorting grabGrab bucketTwin ram grab
Best forAll-purpose: demolition, sorting, sandstone block walls, timber land clearing, timber sorting and feeding chippersDemolition and waste work: sorting fine material and bunching loose rubbishDigging, grabbing and pulling stumps and footings: land clearing, demolition and farm workDedicated grab work: timber, rock and tight rubbish, without rotation
JawsBox tine on curved plates, closes to 30–50 mmWide-opening, curved gathering jaws with a bolt-on cutting edgeWide-opening jaws, larger than a single ram grab, with interchangeable teethBox tine on curved plates, a cylinder on each jaw, closes to 30–50 mm
Sorting very fine materialYesBest: the flat bolt-on edge gives a fine pinch pointNo: built to dig, grab and pullCloses tight on small pieces; the flat bolt-on edge of the demolition grab is best for the finest material
Digs and pulls stumpsNot what it is built forNot what it is built forYes: connects directly to the hitchNot what it is built for
RotationContinuous 360°, Danfoss motorContinuous 360°, Danfoss motorNone: fixedNone: fixed
Sizes (tonnes)5–6.5, 7–9, 12–16, 20–305–8, 12–16, 20–303–4, 5–6.5, 7.5–9, 12–16, 20–23, 25–305–6.5, 7–9, 12–16, 20–30
Price from (ex GST)$9,500 (5–6.5T)$11,990 (5–8T)$2,850 (3–4T)$6,500 (5–6.5T)
Warranty2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)

This is the grab for specific demolition work. The flat bolt-on edge makes it great for sorting very fine material, and the wide jaw opening and wide gathering jaw shape bunch loose material like rubbish very well when it closes.

If you want one grab that does everything, choose the Gen 2 rotating grab. It’s our all-purpose rotating grab for demolition, sorting, sandstone block walls, timber land clearing, timber sorting and feeding chippers.

If you don’t need rotation and do dedicated grab work, choose the twin ram grab: a cylinder on each jaw gives it 40% more clamping force than our single ram grabs, a wider opening and tight closing, from $6,500 ex GST.

If you need to dig, pull stumps or footings out of the ground, choose the grab bucket. It’s a bucket with a hydraulic jaw, from $2,850 ex GST.

See the Gen 2 rotating grab, see the twin ram grab, see the grab bucket, or request a quote or call 1300 441 121 and we’ll match the right grab to your excavator.

Excavator Rotating Demolition Sorting Grab

$11,990.00 $26,990.00 ex-GST

Request a Quote

On Page Quote Request

SKU: N/A

Category: Excavator Grabs

Need Finance?

Use our finance calculator to estimate your repayments.

Estimated monthly repayment range:
— to — per month

Disclaimer: Repayments are indicative only and subject to approval and credit assessment.

Key Features

  • Double-sided bolt-on cutting edge: a fine pinch point for sorting very fine material
  • Wide jaw opening and wide gathering jaws bunch loose material like rubbish
  • Continuous 360° rotation with a Danfoss motor, quality ring gear and swivel joint
  • NM400 (400 grade) jaws and body for abrasion and dent resistance
  • Guarded cylinders rated to 5,000 psi
  • Slotted jaw shells let dirt and fines drop through while you sort
  • Head bracket, hoses and couplers included
  • Designed and engineered in Australia, refined over 10 years, final assembly at Burnside
  • Fully backed, serviced, in stock and ready to go.

Excavator Rotating Demolition Sorting Grab

$11,990.00 $26,990.00 ex-GST

SKU: N/A
Request a Quote

Quote Request

Need Finance?

Use our finance calculator to estimate your repayments.

Estimated monthly repayment range:
— to — per month

Disclaimer: Repayments are indicative only and subject to approval and credit assessment.

Key Features

  • Double-sided bolt-on cutting edge: a fine pinch point for sorting very fine material
  • Wide jaw opening and wide gathering jaws bunch loose material like rubbish
  • Continuous 360° rotation with a Danfoss motor, quality ring gear and swivel joint
  • NM400 (400 grade) jaws and body for abrasion and dent resistance
  • Guarded cylinders rated to 5,000 psi
  • Slotted jaw shells let dirt and fines drop through while you sort
  • Head bracket, hoses and couplers included
  • Designed and engineered in Australia, refined over 10 years, final assembly at Burnside
  • Fully backed, serviced, in stock and ready to go.

Product Overview

Get a quote or call 1300 441 121

Rotating demolition and sorting grab with a double-sided bolt-on edge and wide gathering jaws.

The flat bolt-on edge sorts very fine material, and the wide jaws bunch loose rubbish as they close. Continuous 360° rotation with a Danfoss motor, NM400 jaws with slotted shells, and guarded 5,000 psi cylinders. Three sizes for 5 to 30 tonne excavators, from $11,990 ex GST, with the head bracket, hoses and couplers. 2-year warranty, including the rotator motor and valving.

Fully backed, serviced, in stock and ready to go. In stock, usually dispatched same day from Burnside.

Model5–8T demolition grab12–16T demolition grab20–30T demolition grab
Excavator size5–8 tonnes12–16 tonnes20–30 tonnes
Weight320 kg900 kg1,800 kg
Maximum jaw opening1,100 mm1,800 mm2,250 mm
Jaw width500 mm850 mm1,050 mm
JawsPaddle-style gathering jaws with slotted shells, NM400 (400 grade) steelPaddle-style gathering jaws with slotted shells, NM400 (400 grade) steelPaddle-style gathering jaws with slotted shells, NM400 (400 grade) steel
Cutting edgeDouble-sided, bolt-onDouble-sided, bolt-on, 840 × 175 × 20 mm, M16 bolts (4 per side)Double-sided, bolt-on, 1,050 × 200 × 25 mm, M20 bolts (8 per side)
RotationContinuous 360°, Danfoss rotation motorContinuous 360°, Danfoss rotation motorContinuous 360°, Danfoss rotation motor
CylinderGuarded, rated to 5,000 psiGuarded, rated to 5,000 psiGuarded, rated to 5,000 psi
ValvingCross port relief valveCross port relief valveCross port relief valve
Jaw circuit flow40–65 L/min75 L/min90 L/min
Rotation circuit flow12–18 L/min12–18 L/min12–18 L/min
Auxiliary circuitsTwo: one for the jaws, one for rotationTwo: one for the jaws, one for rotationTwo: one for the jaws, one for rotation
Case drainNot neededRequiredRequired
IncludedHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplers
Warranty2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)
Price (ex GST)$11,990$18,990$26,990

The AR Equipment rotating demolition sorting grab is the specialist for demolition, waste sorting and recycling. A flat, double-sided bolt-on cutting edge closes to a fine pinch point for sorting very fine material, and the wide jaw opening and wide gathering jaws bunch loose material like rubbish very well as they close. Continuous 360° rotation on a Danfoss motor lines the jaws up without moving the machine.

Three sizes: 5–8T at $11,990, 12–16T at $18,990 and 20–30T at $26,990, all ex GST, with the head bracket, hoses and couplers. Fully backed, serviced, in stock and ready to go.

Demolition grab specifications

Model5–8T demolition grab12–16T demolition grab20–30T demolition grab
Excavator size5–8 tonnes12–16 tonnes20–30 tonnes
Weight320 kg900 kg1,800 kg
Maximum jaw opening1,100 mm1,800 mm2,250 mm
Jaw width500 mm850 mm1,050 mm
JawsPaddle-style gathering jaws with slotted shells, NM400 (400 grade) steelPaddle-style gathering jaws with slotted shells, NM400 (400 grade) steelPaddle-style gathering jaws with slotted shells, NM400 (400 grade) steel
Cutting edgeDouble-sided, bolt-onDouble-sided, bolt-on, 840 × 175 × 20 mm, M16 bolts (4 per side)Double-sided, bolt-on, 1,050 × 200 × 25 mm, M20 bolts (8 per side)
RotationContinuous 360°, Danfoss rotation motorContinuous 360°, Danfoss rotation motorContinuous 360°, Danfoss rotation motor
CylinderGuarded, rated to 5,000 psiGuarded, rated to 5,000 psiGuarded, rated to 5,000 psi
ValvingCross port relief valveCross port relief valveCross port relief valve
Jaw circuit flow40–65 L/min75 L/min90 L/min
Rotation circuit flow12–18 L/min12–18 L/min12–18 L/min
Auxiliary circuitsTwo: one for the jaws, one for rotationTwo: one for the jaws, one for rotationTwo: one for the jaws, one for rotation
Case drainNot neededRequiredRequired
IncludedHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplers
Warranty2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)
Price (ex GST)$11,990$18,990$26,990
Match the grab to your excavator’s weight and auxiliary circuits. Send us your make, model and pin size and we’ll confirm the size and hydraulic set-up before you order.

Built for demolition and waste work

Flat bolt-on cutting edge for fine sorting

The flat edge gives a fine pinch point, so you can pick small pieces and fine material out of a mixed pile instead of letting them slip through. The edge is double-sided and bolted on: turn it over when one side wears, and bolt on a new one when both are done, instead of rebuilding the jaw.

Wide gathering jaws

The jaws open wide and are shaped to gather as they close, so loose material like rubbish, timber offcuts and mixed waste gets bunched into the middle of the grab. You pick up more with every bite and drop less loading bins and trucks. The jaw shells are slotted, so dirt and fines drop through while you sort and you load cleaner material.

Danfoss rotation, quality ring gear and swivel joint

The componentry is high end: Danfoss rotation motors, high-quality ring gears and high-quality swivel joints. We only run Danfoss motors, because we couldn’t get the same longevity out of anything else. That’s what separates it from cheaper grabs: it’s built to compete with European and American-built grabs, which is why it costs more.

NM400 jaws and body

The jaws and body are NM400, a 400 grade wear-resistant steel. It’s what we found works best for abrasion resistance and for resisting dents and deformation when the grab is working in concrete, steel and rubble.

Guarded 5,000 psi cylinders

The cylinders are rated to 5,000 psi, like every AR Equipment hydraulic grab, and they’re guarded along with the hydraulics, so stray waste strikes don’t take out a cylinder or a hose. A cross port relief valve protects the circuit.

Hydraulic requirements

  • Auxiliary circuits: two, one for the jaws and one for rotation.
  • Jaw circuit flow: 40–65 L/min (5–8T), 75 L/min (12–16T), 90 L/min (20–30T).
  • Rotation circuit flow: 12–18 L/min on every size.
  • Case drain: required on the 12–16T and 20–30T, not needed on the 5–8T.
  • Cylinders: rated to 5,000 psi, with a cross port relief valve.
  • Supplied: head bracket, hoses and couplers.

Our demolition grab against a typical budget sorting grab

AR Equipment rotating demolition sorting grabTypical budget sorting grab
Rotation motorDanfoss, with high-quality ring gear and swivel jointOften an unbranded motor
Jaw steelNM400 (400 grade) jaws and body for abrasion and dent resistanceOften mild or lower-grade steel
Cutting edgeDouble-sided, bolt-on: flip it, then replace itOften welded on, or none
Fine materialFlat bolt-on edge gives a fine pinch pointGaps let fine material slip
CylinderGuarded, rated to 5,000 psiOften exposed
Jaw shellsSlotted, so dirt and fines drop through while you sortOften solid
Parts and serviceCutting edges, bash plates, cylinders and motors on the shelf at Burnside, with our own machine shopDepends on the seller

Which size suits your excavator?

  • 5–8T: 5 to 8 tonne excavators. 320 kg, 1,100 mm opening. No case drain needed. $11,990 ex GST.
  • 12–16T: 12 to 16 tonne excavators. 900 kg, 1,800 mm opening. Case drain required. $18,990 ex GST.
  • 20–30T: 20 to 30 tonne excavators. 1,800 kg, 2,250 mm opening. Case drain required. $26,990 ex GST.
  • Not sure? Send us your make, model and pin size and we’ll confirm the size and hydraulic set-up.

Where it works

  • Demolition sites: pulling apart and separating timber, steel and masonry
  • Waste transfer stations and recycling yards: sorting mixed waste into streams
  • Picking fine material and small pieces out of a pile
  • Loading loose rubbish into bins, skips and trucks
  • Scrap yards: sorting and loading scrap
  • Site clean-ups after demolition

Spare parts

PartSuitsPart codePrice (ex GST)
Danfoss rotation motorDemolition grab and Gen 2SPKROTATINGMOTOR$2,250
Cutting edge with bolts (per edge)5–8TSPDGK5CUTEDGE$220
Cutting edge with bolts (840 × 175 × 20 mm, M16 × 4 per side)12–16TSPDGK12CUTEDGE$350
Cutting edge with bolts (1,050 × 200 × 25 mm, M20 × 8 per side)20–30TSPDGK20CUTEDGE$450
Bash plate5–8TSPDGK5BASHPLATE$150
Bash plate12–16TSPDGK12BASHPLATE$300
Bash plate20–30TSPDGK20BASHPLATE$350
Cylinder5–8TSPDGK5CYLINDER$1,400
Cylinder12–16TSPDGK12CYLINDER$2,150
Cylinder20–30TSPDGK20CYLINDER$2,450
Prices ex GST.

Videos

https://www.youtube.com/watch?v=C0vXLEzpsTc
James from AR Equipment walks through the rotating demolition grab: Danfoss motor, ring gear, swivel joint and 400 grade jaws, with the grab working on M&K Earthmoving’s Komatsu.
https://www.youtube.com/watch?v=OwhpsFYjXm4
The AR Equipment rotating demolition grab sorting and loading material.
https://www.youtube.com/watch?v=HYAXByJTpL4
A JCB JS20MH materials handler working with our grab. We work with machine dealers such as JCB.

In stock, well serviced and supported

Fully backed, serviced, in stock and ready to go. We’re fully backed here in Australia with parts and service, and we have a full machine shop at Burnside QLD. If you need a part, you can usually get it today, just like the grabs: in stock when you want one. In stock, usually dispatched same day from Burnside. Uncommon fitments built to order at our Burnside workshop take a little longer, and we’ll give you a date when you order.

Designed in Australia, assembled at Burnside

Designed and engineered in Australia, with final assembly at our Burnside QLD workshop. We’ve been building demolition grabs for 10 years. Over that time we’ve refined the design, engineered out the problems the early grabs had and sourced better components, and we’re really happy with where it’s landed.

Warranty

2-year warranty covering cylinder and structural failure, plus the rotator motor and valving. Hoses aren’t covered. Full terms are in our Terms and Conditions.

Talk to us

AR Equipment Pty Ltd, Burnside QLD. Supplying attachments since 2014, with over 50 years of combined experience. Call 1300 441 121, Monday to Friday 7:30am to 5:00pm, or request a quote on this page.

Also see our Gen 2 rotating grab, which rotating grab should I choose?, excavator magnets, concrete pulveriser and all excavator grabs.

Frequently asked questions

What is a rotating demolition sorting grab?

It’s a hydraulic grab for your excavator that opens, closes and rotates a full 360°. You use it to pull apart, sort and load demolition and waste material: timber, steel, masonry, rubble, scrap and loose rubbish. Rotation lets you line the jaws up with the load without moving the machine.

What’s the difference between a demolition grab and a sorting grab?

The names overlap. A sorting grab picks, separates and loads material that’s already down, and a demolition grab is built heavier to take the pulls and knocks of demolition. Ours is both: NM400 jaws and guarded cylinders for demolition, and a flat bolt-on edge and wide gathering jaws for sorting.

Demolition grab or Gen 2 rotating grab: which should I buy?

If most of your work is demolition, waste sorting and recycling, get the demolition grab. The flat bolt-on edge sorts very fine material and the wide gathering jaws bunch loose rubbish. If you want one grab for everything, including sandstone walls, land clearing and feeding chippers, the Gen 2 rotating grab is the all-rounder.

What size demolition grab do I need?

Match the grab to your excavator’s weight: the 5–8T grab suits 5 to 8 tonne excavators, the 12–16T suits 12 to 16 tonnes and the 20–30T suits 20 to 30 tonnes. Send us your make, model and pin size and we’ll confirm the size.

What is the bolt-on cutting edge for?

The flat edge closes to a fine pinch point, so you can pick small and fine material out of a pile instead of letting it slip through. It’s double-sided and bolted on, so when one side wears you turn it over, and when both sides are worn you bolt on a new edge rather than rebuilding the jaw.

Is it good for loading loose rubbish into bins and trucks?

Yes. The wide jaw opening and the wide gathering shape of the jaws bunch loose material together as they close, so you pick up more with each bite and drop less.

Does it rotate continuously?

Yes, continuous 360° rotation, driven by a Danfoss rotation motor with a high-quality ring gear and swivel joint. The Danfoss motor has its own built-in bearings.

Why Danfoss motors?

Longevity. We’ve tried others and couldn’t get the same life out of them, so every AR demolition grab runs a Danfoss rotation motor.

What steel are the jaws made from?

NM400, a 400 grade wear-resistant steel, on the jaws and body. We found it gives the best abrasion and dent resistance for demolition and waste work.

What are the cylinders rated to?

The cylinders are rated to 5,000 psi, the same as every AR Equipment hydraulic grab, and they’re guarded to protect them and the hoses from strikes by stray material. A cross port relief valve protects the circuit.

Does my excavator need a case drain?

The 12–16T and 20–30T grabs need a case drain: a low-pressure line that returns oil from the rotation motor’s case to the tank. The 5–8T grab doesn’t. If your machine doesn’t have a case drain return, have one fitted before the grab arrives.

What’s included?

The grab comes with the head bracket, hoses and couplers. Tell us your machine make, model and pin size so the head bracket and pins match your excavator.

How much hydraulic flow does it need?

Two auxiliary circuits: one for the jaws and one for rotation. The jaw circuit needs 40–65 L/min on the 5–8T, 75 L/min on the 12–16T and 90 L/min on the 20–30T. Rotation needs 12–18 L/min on every size. Send us your machine details and we’ll confirm the set-up.

Where is it made?

Designed and engineered in Australia, with final assembly at our Burnside QLD workshop.

Can it handle scrap metal?

Yes, sorting and loading scrap is everyday work for it. For picking up ferrous scrap in volume, also look at our excavator magnets.

Can a demolition grab crush concrete?

No. It grips, pulls apart, sorts and loads broken concrete and rubble, but it isn’t a crusher. For breaking concrete down, use a concrete pulveriser or rock breaker.

What warranty does it have?

2-year warranty covering cylinder and structural failure, plus the rotator motor and valving. Hoses aren’t covered. Full terms are in our Terms and Conditions.

Do you keep spare parts?

Yes. We keep cutting edges, bash plates, cylinders and Danfoss rotation motors on the shelf, and our machine shop at Burnside services and repairs what we sell. If you need a part, you can usually have it today.

How much does a demolition grab cost?

$11,990 ex GST for the 5–8T, $18,990 for the 12–16T and $26,990 for the 20–30T. You can spread the cost with the finance calculator on this page.

Can I hire one?

No, we don’t hire. Every AR attachment is sale only, in stock and ready to go.

Is it in stock and how fast can I get one?

Yes. In stock, usually dispatched same day from Burnside. Uncommon fitments built to order at our Burnside workshop take a little longer, and we’ll give you a date when you order.

How do I order?

Choose your excavator size and request a quote on this page, or call 1300 441 121, Monday to Friday 7:30am to 5:00pm. Tell us your machine make, model and pin size.

Which grab should I choose?

All four have cylinders rated to 5,000 psi. The difference is the job each one is built for.

Gen 2 rotating grabRotating demolition sorting grabGrab bucketTwin ram grab
Best forAll-purpose: demolition, sorting, sandstone block walls, timber land clearing, timber sorting and feeding chippersDemolition and waste work: sorting fine material and bunching loose rubbishDigging, grabbing and pulling stumps and footings: land clearing, demolition and farm workDedicated grab work: timber, rock and tight rubbish, without rotation
JawsBox tine on curved plates, closes to 30–50 mmWide-opening, curved gathering jaws with a bolt-on cutting edgeWide-opening jaws, larger than a single ram grab, with interchangeable teethBox tine on curved plates, a cylinder on each jaw, closes to 30–50 mm
Sorting very fine materialYesBest: the flat bolt-on edge gives a fine pinch pointNo: built to dig, grab and pullCloses tight on small pieces; the flat bolt-on edge of the demolition grab is best for the finest material
Digs and pulls stumpsNot what it is built forNot what it is built forYes: connects directly to the hitchNot what it is built for
RotationContinuous 360°, Danfoss motorContinuous 360°, Danfoss motorNone: fixedNone: fixed
Sizes (tonnes)5–6.5, 7–9, 12–16, 20–305–8, 12–16, 20–303–4, 5–6.5, 7.5–9, 12–16, 20–23, 25–305–6.5, 7–9, 12–16, 20–30
Price from (ex GST)$9,500 (5–6.5T)$11,990 (5–8T)$2,850 (3–4T)$6,500 (5–6.5T)
Warranty2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)

This is the grab for specific demolition work. The flat bolt-on edge makes it great for sorting very fine material, and the wide jaw opening and wide gathering jaw shape bunch loose material like rubbish very well when it closes.

If you want one grab that does everything, choose the Gen 2 rotating grab. It’s our all-purpose rotating grab for demolition, sorting, sandstone block walls, timber land clearing, timber sorting and feeding chippers.

If you don’t need rotation and do dedicated grab work, choose the twin ram grab: a cylinder on each jaw gives it 40% more clamping force than our single ram grabs, a wider opening and tight closing, from $6,500 ex GST.

If you need to dig, pull stumps or footings out of the ground, choose the grab bucket. It’s a bucket with a hydraulic jaw, from $2,850 ex GST.

See the Gen 2 rotating grab, see the twin ram grab, see the grab bucket, or request a quote or call 1300 441 121 and we’ll match the right grab to your excavator.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Excavator Rotating Demolition Sorting Grab”

Your email address will not be published. Required fields are marked *


Enquire about our 2025 product catalogue

Access our comprehensive excavator and skid steer equipment catalogue, featuring complete specifications, pricing, and technical details for our full range of attachments and machinery solutions.

Get In Touch

Please fill out the form below and one of our friendly staff will get back to you

Quick Enquiry

Free Freight banner images with SkidSteer Slasher attachment
Black Friday

FREE SHIPPING

Orders placed between now and Cyber Monday will have free shipping to your nearest depot