HMB Skid Steer Rock Breaker (Hydraulic Hammer), 20–90HP

HMB skid steer rock breakers (hydraulic hammers) for 20 to 90 horsepower skid steers, co-branded with AR Equipment, the Australian distributor.

Three sizes (20-30HP, 30-40HP and 50-90HP), each silenced, with a skid steer quick-attach hitch, 2 m hoses, couplers and a point and chisel moil included, nitrogen pre-charged. The plate and head bracket swap so the same unit can run as a post rammer or on an excavator mount. From $4,500 ex GST.

In stock, usually dispatched same day from Burnside. 2-year warranty covering structural failure, with the piston covered for failure, not wear and tear (hoses not covered).

ModelARE 20-30HPARE 30-40HPARE 50-90HP
Skid steer (HP)20-3030-4050-90
Weight (kg)150190340
Oil flow required (L/min)15-3025-4535-60
Working pressure (psi)1900-22001900-22001900-2200
Impact rate (bpm)400-1000500-1100500-900
Impact energy (joules)260320800
Moil shaft diameter (mm)405368
Hose diameter (inch)1/21/21/2
Included2 m hoses, couplers, point and chisel moil, tool box with spare consumables, skid steer quick-attach hitch, nitrogen pre-charged2 m hoses, couplers, point and chisel moil, tool box with spare consumables, skid steer quick-attach hitch, nitrogen pre-charged2 m hoses, couplers, point and chisel moil, tool box with spare consumables, skid steer quick-attach hitch, nitrogen pre-charged
Price (ex GST)$4,500$5,990$6,990

From $4,500 ex GST. 20–90HP skid steers. HMB rock breaker, AR Equipment is the Australian distributor. Silenced body, quick-attach hitch, 2 m hoses and couplers included. 2-year warranty. In stock, usually dispatched same day from Burnside. Call 1300 441 121 or request a quote on this page.

Stock and dispatch: every size is in stock. In stock, usually dispatched same day from Burnside.

Specifications

Model ARE 20-30HP ARE 30-40HP ARE 50-90HP
Skid steer (HP) 20-30 30-40 50-90
Weight (kg) 150 190 340
Oil flow required (L/min) 15-30 25-45 35-60
Working pressure (psi) 1900-2200 1900-2200 1900-2200
Impact rate (bpm) 400-1000 500-1100 500-900
Impact energy (joules) 260 320 800
Moil shaft diameter (mm) 40 53 68
Hose diameter (inch) 1/2 1/2 1/2
Price (ex GST) $4,500 $5,990 $6,990

Key features

  • Co-branded AR Equipment and HMB rock breaker, a Korean HMB design, with AR Equipment as the Australian distributor
  • HMB builds the breaker with its own in-house, state-of-the-art heat treatment and metallurgy department; around 480 HMB breakers and post rammers working across Australia since 2017
  • Silenced (boxed, dampened body) breakers only, with rubber dampeners top and bottom to cushion the blow and protect your machine
  • Three sizes by skid steer horsepower, 20-30HP, 30-40HP and 50-90HP, with prices shown on every size
  • Skid steer quick-attach hitch, 2 m hoses, couplers, point and chisel moil and tool box with spare consumables included, nitrogen pre-charged
  • Plate and head bracket swappable on every size: run it as a rock breaker, a post rammer or on an excavator mount
  • Assembled, flow-bench tested, greased and checklisted at our Burnside workshop
  • Fully serviceable, with repairs, rebuilds and genuine parts from our workshop
  • 2-year warranty on structural failure, with the piston covered for failure, not wear and tear

HMB skid steer rock breakers for 20 to 90 horsepower machines

The AR Equipment x HMB skid steer rock breaker is a hydraulic hammer for breaking rock, concrete and hard ground using your skid steer’s auxiliary hydraulics. There are three sizes, 20-30HP, 30-40HP and 50-90HP, matched to the machine’s horsepower and auxiliary flow. Every size includes a skid steer quick-attach hitch, 2 m hoses, couplers, a point and chisel moil and a tool box with spare consumables, and arrives nitrogen pre-charged, so it is ready to work once it is on the machine.

Co-branded with HMB, supported by AR Equipment

This is a Korean HMB design. AR Equipment is HMB’s Australian distributor, and around 480 HMB breakers and post rammers are working across Australia since 2017. HMB runs its own state-of-the-art heat treatment and metallurgy department inside its factory, and the steel in the head is where that shows. Final assembly, flow-bench testing, greasing and checklist are done at our Burnside workshop on the Sunshine Coast before it ships, and our workshop backs every unit with parts, servicing and repairs.

Why we only run silenced breakers

Every AR Equipment breaker is a silenced (boxed, dampened body) breaker. Rubber dampeners at the top and bottom of the breaker cushion the blow, so the percussion is absorbed in the body instead of travelling back into the carrier. Cheaper breakers without a silenced, dampened body send that percussion straight back to the machine, which causes more wear on pins and bushes, on both the machine and the breaker. On a skid steer, where the attachment mounts close to the machine, that cushioning matters.

Power and sizing

Working pressure is 1900-2200 psi on every size. The 20-30HP needs 15-30 L/min and delivers 260 joules at 400-1000 bpm with a 40 mm moil. The 30-40HP needs 25-45 L/min and delivers 320 joules at 500-1100 bpm with a 53 mm moil. The 50-90HP needs 35-60 L/min and delivers 800 joules at 500-900 bpm with a 68 mm moil. Hose diameter is 1/2 inch on every size, and moil size is the shaft diameter. Always match the breaker’s flow to what your skid steer’s auxiliary circuit can supply, and send us your machine make and model so we can confirm the right size before you order.

Hitch, plate and one unit for more than one job

Every breaker includes a skid steer quick-attach hitch. The plate and head bracket are swappable on every size, so the same unit can run as a normal rock breaker, as a post rammer, or on an excavator mount. See our skid steer post rammer and our HMB excavator rock breakers.

What is in the box

  • Skid steer quick-attach hitch
  • 2 m hoses and couplers
  • Point and chisel moil
  • A tool box with spare consumables
  • Nitrogen pre-charged, ready to go

Where a skid steer rock breaker earns its keep

  • Trenching through rock and hard ground
  • Breaking oversize rock and boulders
  • Demolition and concrete breaking
  • Foundations, footings and service installations

Prices

Prices are ex GST: 20-30HP $4,500, 30-40HP $5,990 and 50-90HP $6,990.

In stock, well serviced and supported

Every size is in stock, plus genuine parts, and our Burnside workshop services, repairs and rebuilds what we sell. In stock, usually dispatched same day from Burnside. Most in-stock attachments leave Burnside the same day. Uncommon fitments built to order at our Burnside workshop take a little longer, and we’ll give you a date when you order.

Warranty

2-year warranty covering structural failure. The piston is covered for failure, not wear and tear. Hoses are never covered on any attachment.

Talk to us

AR Equipment Pty Ltd, Burnside QLD. Supplying attachments since 2014, with over 50 years of combined experience. Call 1300 441 121, Monday to Friday 7:30am to 5:00pm, or request a quote on this page.

Frequently asked questions

What is a skid steer rock breaker?

A skid steer rock breaker, also called a hydraulic hammer, is an attachment that drives a steel tool into rock, concrete or hard ground using your skid steer’s auxiliary hydraulics. Nitrogen in the head works with the oil to give each blow its energy.

What size rock breaker suits my skid steer?

We list three sizes by skid steer horsepower: 20-30HP, 30-40HP and 50-90HP. Check your machine’s auxiliary flow and pressure against the spec table, then send us your make and model and we’ll confirm the right size before you order.

Who makes the AR Equipment skid steer rock breaker?

It is a co-branded AR Equipment and HMB rock breaker. The design is Korean, and AR Equipment is HMB’s Australian distributor. HMB has its own in-house heat treatment and metallurgy department. Final assembly, flow-bench testing, greasing and checklist are done at our Burnside workshop.

What oil flow and pressure does a skid steer rock breaker need?

Working pressure is 1900-2200 psi on every size. Flow is 15-30 L/min on the 20-30HP, 25-45 L/min on the 30-40HP and 35-60 L/min on the 50-90HP. Check that your skid steer’s auxiliary circuit can supply the flow before you order.

What is included with the rock breaker?

Each unit comes with a skid steer quick-attach hitch, 2 m hoses, couplers, a point and chisel moil and a tool box with spare consumables. It arrives nitrogen pre-charged and ready to work.

Will it fit my skid steer?

Each breaker includes a skid steer quick-attach hitch. Fit depends on your machine’s attachment system and auxiliary hydraulics, so send us your make and model and we’ll confirm before you order.

How much does a skid steer rock breaker cost?

Prices ex GST: 20-30HP $4,500, 30-40HP $5,990 and 50-90HP $6,990. Freight is calculated on your quote or at checkout.

What does ’silenced’ mean on a rock breaker?

A silenced (boxed, dampened body) breaker has rubber dampeners at the top and bottom that cushion the blow. Every AR Equipment breaker, in every size, is silenced.

Why does a silenced breaker matter on a skid steer?

Breakers without a dampened body send the percussion straight back to the machine, which causes more wear on pins and bushes on both the machine and the breaker. The rubber dampeners cushion the blow and protect your skid steer.

Can I use the breaker as a post rammer, or on an excavator?

Yes. The plate and head bracket are swappable on every size, so the same unit can run as a rock breaker, a post rammer or on an excavator mount. See our skid steer post rammer and excavator rock breaker pages.

What warranty does the rock breaker have?

2 years, covering structural failure. The piston is covered for failure, not wear and tear. Hoses are never covered on any attachment.

Is the rock breaker in stock?

Yes. In stock, usually dispatched same day from Burnside.

Can I get spare parts and repairs?

Yes. Our Burnside workshop services and repairs what we sell and holds genuine parts.

What can a skid steer rock breaker be used for?

Breaking concrete, rock and hard ground, trenching through rock, demolition and breaking oversize rock. Pick the size to match your machine’s hydraulics.

How do I order or get a quote?

Use the quote form on this page or call 1300 441 121, Monday to Friday 7:30am to 5:00pm.

HMB Skid Steer Rock Breaker (Hydraulic Hammer)

$4,500.00 $6,990.00 ex-GST

Request a Quote

On Page Quote Request

SKU: N/A

Category: Skid Steer

Need Finance?

Use our finance calculator to estimate your repayments.

Estimated monthly repayment range:
— to — per month

Disclaimer: Repayments are indicative only and subject to approval and credit assessment.

Key Features

  • Co-branded AR Equipment and HMB rock breaker, a Korean HMB design, with AR Equipment as the Australian distributor
  • HMB builds the breaker with its own in-house, state-of-the-art heat treatment and metallurgy department; around 480 HMB breakers and post rammers working across Australia since 2017
  • Silenced (boxed, dampened body) breakers only, with rubber dampeners top and bottom to cushion the blow and protect your machine
  • Three sizes by skid steer horsepower, 20-30HP, 30-40HP and 50-90HP, with prices shown on every size
  • Skid steer quick-attach hitch, 2 m hoses, couplers, point and chisel moil and tool box with spare consumables included, nitrogen pre-charged
  • Plate and head bracket swappable on every size: run it as a rock breaker, a post rammer or on an excavator mount
  • Assembled, flow-bench tested, greased and checklisted at our Burnside workshop
  • Fully serviceable, with repairs, rebuilds and genuine parts from our workshop
  • 2-year warranty on structural failure, with the piston covered for failure, not wear and tear

HMB Skid Steer Rock Breaker (Hydraulic Hammer)

$4,500.00 $6,990.00 ex-GST

SKU: N/A
Request a Quote

Quote Request

Need Finance?

Use our finance calculator to estimate your repayments.

Estimated monthly repayment range:
— to — per month

Disclaimer: Repayments are indicative only and subject to approval and credit assessment.

Key Features

  • Co-branded AR Equipment and HMB rock breaker, a Korean HMB design, with AR Equipment as the Australian distributor
  • HMB builds the breaker with its own in-house, state-of-the-art heat treatment and metallurgy department; around 480 HMB breakers and post rammers working across Australia since 2017
  • Silenced (boxed, dampened body) breakers only, with rubber dampeners top and bottom to cushion the blow and protect your machine
  • Three sizes by skid steer horsepower, 20-30HP, 30-40HP and 50-90HP, with prices shown on every size
  • Skid steer quick-attach hitch, 2 m hoses, couplers, point and chisel moil and tool box with spare consumables included, nitrogen pre-charged
  • Plate and head bracket swappable on every size: run it as a rock breaker, a post rammer or on an excavator mount
  • Assembled, flow-bench tested, greased and checklisted at our Burnside workshop
  • Fully serviceable, with repairs, rebuilds and genuine parts from our workshop
  • 2-year warranty on structural failure, with the piston covered for failure, not wear and tear

Product Overview

HMB skid steer rock breakers (hydraulic hammers) for 20 to 90 horsepower skid steers, co-branded with AR Equipment, the Australian distributor.

Three sizes (20-30HP, 30-40HP and 50-90HP), each silenced, with a skid steer quick-attach hitch, 2 m hoses, couplers and a point and chisel moil included, nitrogen pre-charged. The plate and head bracket swap so the same unit can run as a post rammer or on an excavator mount. From $4,500 ex GST.

In stock, usually dispatched same day from Burnside. 2-year warranty covering structural failure, with the piston covered for failure, not wear and tear (hoses not covered).

ModelARE 20-30HPARE 30-40HPARE 50-90HP
Skid steer (HP)20-3030-4050-90
Weight (kg)150190340
Oil flow required (L/min)15-3025-4535-60
Working pressure (psi)1900-22001900-22001900-2200
Impact rate (bpm)400-1000500-1100500-900
Impact energy (joules)260320800
Moil shaft diameter (mm)405368
Hose diameter (inch)1/21/21/2
Included2 m hoses, couplers, point and chisel moil, tool box with spare consumables, skid steer quick-attach hitch, nitrogen pre-charged2 m hoses, couplers, point and chisel moil, tool box with spare consumables, skid steer quick-attach hitch, nitrogen pre-charged2 m hoses, couplers, point and chisel moil, tool box with spare consumables, skid steer quick-attach hitch, nitrogen pre-charged
Price (ex GST)$4,500$5,990$6,990

From $4,500 ex GST. 20–90HP skid steers. HMB rock breaker, AR Equipment is the Australian distributor. Silenced body, quick-attach hitch, 2 m hoses and couplers included. 2-year warranty. In stock, usually dispatched same day from Burnside. Call 1300 441 121 or request a quote on this page.

Stock and dispatch: every size is in stock. In stock, usually dispatched same day from Burnside.

Specifications

ModelARE 20-30HPARE 30-40HPARE 50-90HP
Skid steer (HP)20-3030-4050-90
Weight (kg)150190340
Oil flow required (L/min)15-3025-4535-60
Working pressure (psi)1900-22001900-22001900-2200
Impact rate (bpm)400-1000500-1100500-900
Impact energy (joules)260320800
Moil shaft diameter (mm)405368
Hose diameter (inch)1/21/21/2
Price (ex GST)$4,500$5,990$6,990

Key features

  • Co-branded AR Equipment and HMB rock breaker, a Korean HMB design, with AR Equipment as the Australian distributor
  • HMB builds the breaker with its own in-house, state-of-the-art heat treatment and metallurgy department; around 480 HMB breakers and post rammers working across Australia since 2017
  • Silenced (boxed, dampened body) breakers only, with rubber dampeners top and bottom to cushion the blow and protect your machine
  • Three sizes by skid steer horsepower, 20-30HP, 30-40HP and 50-90HP, with prices shown on every size
  • Skid steer quick-attach hitch, 2 m hoses, couplers, point and chisel moil and tool box with spare consumables included, nitrogen pre-charged
  • Plate and head bracket swappable on every size: run it as a rock breaker, a post rammer or on an excavator mount
  • Assembled, flow-bench tested, greased and checklisted at our Burnside workshop
  • Fully serviceable, with repairs, rebuilds and genuine parts from our workshop
  • 2-year warranty on structural failure, with the piston covered for failure, not wear and tear

HMB skid steer rock breakers for 20 to 90 horsepower machines

The AR Equipment x HMB skid steer rock breaker is a hydraulic hammer for breaking rock, concrete and hard ground using your skid steer’s auxiliary hydraulics. There are three sizes, 20-30HP, 30-40HP and 50-90HP, matched to the machine’s horsepower and auxiliary flow. Every size includes a skid steer quick-attach hitch, 2 m hoses, couplers, a point and chisel moil and a tool box with spare consumables, and arrives nitrogen pre-charged, so it is ready to work once it is on the machine.

Co-branded with HMB, supported by AR Equipment

This is a Korean HMB design. AR Equipment is HMB’s Australian distributor, and around 480 HMB breakers and post rammers are working across Australia since 2017. HMB runs its own state-of-the-art heat treatment and metallurgy department inside its factory, and the steel in the head is where that shows. Final assembly, flow-bench testing, greasing and checklist are done at our Burnside workshop on the Sunshine Coast before it ships, and our workshop backs every unit with parts, servicing and repairs.

Why we only run silenced breakers

Every AR Equipment breaker is a silenced (boxed, dampened body) breaker. Rubber dampeners at the top and bottom of the breaker cushion the blow, so the percussion is absorbed in the body instead of travelling back into the carrier. Cheaper breakers without a silenced, dampened body send that percussion straight back to the machine, which causes more wear on pins and bushes, on both the machine and the breaker. On a skid steer, where the attachment mounts close to the machine, that cushioning matters.

Power and sizing

Working pressure is 1900-2200 psi on every size. The 20-30HP needs 15-30 L/min and delivers 260 joules at 400-1000 bpm with a 40 mm moil. The 30-40HP needs 25-45 L/min and delivers 320 joules at 500-1100 bpm with a 53 mm moil. The 50-90HP needs 35-60 L/min and delivers 800 joules at 500-900 bpm with a 68 mm moil. Hose diameter is 1/2 inch on every size, and moil size is the shaft diameter. Always match the breaker’s flow to what your skid steer’s auxiliary circuit can supply, and send us your machine make and model so we can confirm the right size before you order.

Hitch, plate and one unit for more than one job

Every breaker includes a skid steer quick-attach hitch. The plate and head bracket are swappable on every size, so the same unit can run as a normal rock breaker, as a post rammer, or on an excavator mount. See our skid steer post rammer and our HMB excavator rock breakers.

What is in the box

  • Skid steer quick-attach hitch
  • 2 m hoses and couplers
  • Point and chisel moil
  • A tool box with spare consumables
  • Nitrogen pre-charged, ready to go

Where a skid steer rock breaker earns its keep

  • Trenching through rock and hard ground
  • Breaking oversize rock and boulders
  • Demolition and concrete breaking
  • Foundations, footings and service installations

Prices

Prices are ex GST: 20-30HP $4,500, 30-40HP $5,990 and 50-90HP $6,990.

In stock, well serviced and supported

Every size is in stock, plus genuine parts, and our Burnside workshop services, repairs and rebuilds what we sell. In stock, usually dispatched same day from Burnside. Most in-stock attachments leave Burnside the same day. Uncommon fitments built to order at our Burnside workshop take a little longer, and we’ll give you a date when you order.

Warranty

2-year warranty covering structural failure. The piston is covered for failure, not wear and tear. Hoses are never covered on any attachment.

Talk to us

AR Equipment Pty Ltd, Burnside QLD. Supplying attachments since 2014, with over 50 years of combined experience. Call 1300 441 121, Monday to Friday 7:30am to 5:00pm, or request a quote on this page.

Frequently asked questions

What is a skid steer rock breaker?

A skid steer rock breaker, also called a hydraulic hammer, is an attachment that drives a steel tool into rock, concrete or hard ground using your skid steer’s auxiliary hydraulics. Nitrogen in the head works with the oil to give each blow its energy.

What size rock breaker suits my skid steer?

We list three sizes by skid steer horsepower: 20-30HP, 30-40HP and 50-90HP. Check your machine’s auxiliary flow and pressure against the spec table, then send us your make and model and we’ll confirm the right size before you order.

Who makes the AR Equipment skid steer rock breaker?

It is a co-branded AR Equipment and HMB rock breaker. The design is Korean, and AR Equipment is HMB’s Australian distributor. HMB has its own in-house heat treatment and metallurgy department. Final assembly, flow-bench testing, greasing and checklist are done at our Burnside workshop.

What oil flow and pressure does a skid steer rock breaker need?

Working pressure is 1900-2200 psi on every size. Flow is 15-30 L/min on the 20-30HP, 25-45 L/min on the 30-40HP and 35-60 L/min on the 50-90HP. Check that your skid steer’s auxiliary circuit can supply the flow before you order.

What is included with the rock breaker?

Each unit comes with a skid steer quick-attach hitch, 2 m hoses, couplers, a point and chisel moil and a tool box with spare consumables. It arrives nitrogen pre-charged and ready to work.

Will it fit my skid steer?

Each breaker includes a skid steer quick-attach hitch. Fit depends on your machine’s attachment system and auxiliary hydraulics, so send us your make and model and we’ll confirm before you order.

How much does a skid steer rock breaker cost?

Prices ex GST: 20-30HP $4,500, 30-40HP $5,990 and 50-90HP $6,990. Freight is calculated on your quote or at checkout.

What does ’silenced’ mean on a rock breaker?

A silenced (boxed, dampened body) breaker has rubber dampeners at the top and bottom that cushion the blow. Every AR Equipment breaker, in every size, is silenced.

Why does a silenced breaker matter on a skid steer?

Breakers without a dampened body send the percussion straight back to the machine, which causes more wear on pins and bushes on both the machine and the breaker. The rubber dampeners cushion the blow and protect your skid steer.

Can I use the breaker as a post rammer, or on an excavator?

Yes. The plate and head bracket are swappable on every size, so the same unit can run as a rock breaker, a post rammer or on an excavator mount. See our skid steer post rammer and excavator rock breaker pages.

What warranty does the rock breaker have?

2 years, covering structural failure. The piston is covered for failure, not wear and tear. Hoses are never covered on any attachment.

Is the rock breaker in stock?

Yes. In stock, usually dispatched same day from Burnside.

Can I get spare parts and repairs?

Yes. Our Burnside workshop services and repairs what we sell and holds genuine parts.

What can a skid steer rock breaker be used for?

Breaking concrete, rock and hard ground, trenching through rock, demolition and breaking oversize rock. Pick the size to match your machine’s hydraulics.

How do I order or get a quote?

Use the quote form on this page or call 1300 441 121, Monday to Friday 7:30am to 5:00pm.

Enquire about our 2025 product catalogue

Access our comprehensive excavator and skid steer equipment catalogue, featuring complete specifications, pricing, and technical details for our full range of attachments and machinery solutions.

Get In Touch

Please fill out the form below and one of our friendly staff will get back to you

Quick Enquiry

Free Freight banner images with SkidSteer Slasher attachment
Black Friday

FREE SHIPPING

Orders placed between now and Cyber Monday will have free shipping to your nearest depot