Excavator Grab Bucket: Dig, Grab and Pull Stumps, 3–30T

Get a quote or call 1300 441 121

Hydraulic grab bucket that digs, grabs and pulls: six sizes for 3 to 30 tonne excavators.

The strong bottom end connects directly to your excavator’s hitch, so you can pull stumps and concrete footings out of the ground, then grab timber or waste with a wide-opening jaw that’s larger than a single ram grab. NM400 wear areas, interchangeable teeth, a protected 5,000 psi cylinder, and head bracket, hoses and couplers included. One auxiliary circuit. From $2,850 ex GST. 2-year warranty on cylinder and structural failure.

Fully backed, serviced, in stock and ready to go. In stock, usually dispatched same day from Burnside.

Model3–4T grab bucket5–6.5T grab bucket7.5–9T grab bucket12–16T grab bucket20–23T grab bucket25–30T grab bucket
Excavator size3–4 tonnes5–6.5 tonnes7.5–9 tonnes12–16 tonnes20–23 tonnes25–30 tonnes
Weight150 kg260 kg280 kg570 kg860 kg900 kg
Maximum jaw opening740 mm1,305 mm1,305 mm1,560 mm1,875 mm1,875 mm
Width420 mm575 mm575 mm620 mm750 mm750 mm
Wear areasNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear strips
Head bracketQ345 steel, includedQ345 steel, includedQ345 steel, includedQ345 steel, includedQ345 steel, includedQ345 steel, included
TeethInterchangeableInterchangeableInterchangeableInterchangeableInterchangeableInterchangeable
Oil flow20 L/min30 L/min40 L/min60 L/min80 L/min90 L/min
Auxiliary circuitsOneOneOneOneOneOne
CylinderProtected, rated to 5,000 psiProtected, rated to 5,000 psiProtected, rated to 5,000 psiProtected, rated to 5,000 psiProtected, rated to 5,000 psiProtected, rated to 5,000 psi
IncludedHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplers
Warranty2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)
Price (ex GST)$2,850$3,750$4,500$7,500$9,990$10,599
Part code (Xero)ARE3-4TGBARE5-6.5TGBARE7.5-9TGBARE12-16TGBARE20-23TGBARE25-30TGB

The AR Equipment grab bucket is a hydraulic excavator bucket with a jaw that closes over the load, so one attachment digs, grabs and pulls. The strong bottom end of the bucket connects directly to the hitch of your excavator, which means you can pull with it: pull a tree stump or a concrete footing out of the ground, then grab timber or waste with a wide jaw opening that’s larger than a single ram grab.

Six sizes for 3 to 30 tonne excavators: 3–4T at $2,850, 5–6.5T at $3,750, 7–9T at $4,500, 12–16T at $7,500, 20–23T at $9,990 and 25–30T at $10,599, all ex GST, with the head bracket, hoses and couplers included. Fully backed, serviced, in stock and ready to go.

Grab bucket specifications

Model3–4T grab bucket5–6.5T grab bucket7–9T grab bucket12–16T grab bucket20–23T grab bucket25–30T grab bucket
Excavator size3–4 tonnes5–6.5 tonnes7–9 tonnes12–16 tonnes20–23 tonnes25–30 tonnes
Weight150 kg260 kg280 kg570 kg860 kg900 kg
Maximum jaw opening740 mm1,305 mm1,305 mm1,560 mm1,875 mm1,875 mm
Width420 mm575 mm575 mm620 mm750 mm750 mm
Wear areasNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear strips
Head bracketQ345 steel, includedQ345 steel, includedQ345 steel, includedQ345 steel, includedQ345 steel, includedQ345 steel, included
TeethInterchangeableInterchangeableInterchangeableInterchangeableInterchangeableInterchangeable
Oil flow20 L/min30 L/min40 L/min60 L/min80 L/min90 L/min
Auxiliary circuitsOneOneOneOneOneOne
CylinderProtected, rated to 5,000 psiProtected, rated to 5,000 psiProtected, rated to 5,000 psiProtected, rated to 5,000 psiProtected, rated to 5,000 psiProtected, rated to 5,000 psi
IncludedHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplers
Warranty2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)
Price (ex GST)$2,850$3,750$4,500$7,500$9,990$10,599
Part code (Xero)ARE3-4TGBARE5-6.5TGBARE7-9TGBARE12-16TGBARE20-23TGBARE25-30TGB
Match the bucket to your excavator’s weight. Send us your make, model and pin size and we’ll confirm the size and hydraulic set-up before you order.

Built to dig, grab and pull

Strong bottom end, direct to the hitch

The strength of the grab bucket is in the bottom end of the bucket, which connects directly to the hitch of the excavator. That’s what lets you pull with it. You can pull a tree stump out of the ground, or a concrete footing.

Wide-opening jaws

The jaws have a larger opening than a single ram grab, so you can pick up bigger piles of timber or bigger piles of waste in a single bite. A hydraulic jaw (grab thumb) closes over the load.

NM400 wear areas and a Q345 head bracket

The wear areas, which are the cutting edge, the side cheek plates and the wear strips, are NM400, a 400 grade wear-resistant steel, like the jaws on our other grabs. The head bracket is Q345 steel, and it’s included.

Interchangeable teeth and a protected cylinder

The teeth are interchangeable, so you replace a worn tooth instead of the bucket. The cylinder is protected and rated to 5,000 psi, like every AR Equipment hydraulic grab.

Hydraulic requirements

  • Auxiliary circuits: one, to open and close the jaw.
  • Oil flow: 20 L/min (3–4T), 30 L/min (5–6.5T), 40 L/min (7–9T), 60 L/min (12–16T), 80 L/min (20–23T), 90 L/min (25–30T). Same as our single ram grabs.
  • Cylinder: protected, rated to 5,000 psi.
  • Supplied: head bracket, hoses and couplers.
  • Send us your make, model and pin size and we’ll confirm the hydraulic set-up and the pins before you order.

Grab bucket vs single ram grab vs rotating grab

Grab bucketSingle ram grabRotating grab (Gen 2, demolition)
Best forDigging, grabbing and pulling stumps and footings with one attachmentLogs, rock and general handlingTurning the load: demolition, sorting, timber
Pulls stumps and footingsYes: the strong bottom end connects directly to the excavator hitchNot what it is built forNot what it is built for
Digs a trenchYesNot what it is built forNot what it is built for
RotationNo: fixedNo: fixedContinuous 360°
Jaw openingLarger than a single ram grabSee the single ram grab pageSee the grab pages
TeethInterchangeableSee the single ram grab pageBox tine or bolt-on edge

Which size suits your excavator?

  • 3–4T: 3 to 4 tonne excavators. 150 kg, 740 mm opening, 420 mm wide. 20 L/min. $2,850 ex GST.
  • 5–6.5T: 5 to 6.5 tonne excavators. 260 kg, 1,305 mm opening, 575 mm wide. 30 L/min. $3,750 ex GST.
  • 7–9T: 7 to 9 tonne excavators. 280 kg, 1,305 mm opening, 575 mm wide. 40 L/min. $4,500 ex GST.
  • 12–16T: 12 to 16 tonne excavators. 570 kg, 1,560 mm opening, 620 mm wide. 60 L/min. $7,500 ex GST.
  • 20–23T: 20 to 23 tonne excavators. 860 kg, 1,875 mm opening, 750 mm wide. 80 L/min. $9,990 ex GST.
  • 25–30T: 25 to 30 tonne excavators. 900 kg, 1,875 mm opening, 750 mm wide. 90 L/min. $10,599 ex GST. The same size as the 20–23T in a heavier-duty build.
  • Not sure? Send us your make, model and pin size and we’ll confirm the size.

Where it works

  • Land clearing: knock trees over, dig stumps out and grab the timber
  • Demolition and recycling: pull concrete footings and grab waste
  • Civil and earthmoving: digging and trenching without changing over
  • Farm work: one attachment for trees, stumps and trenches
  • Removing tough footings and root systems
  • Moving large rocks

Spare parts

PartSuitsPart codePrice (ex GST)
Cylinder3–4TSPGBK3CYLINDER$750
Cylinder5–6.5T and 7–9TSPGBK5-8CYLINDER$899
Cylinder12–16TSPGBK12CYLINDER$1,750
Cylinder20–23TSPGBK20CYLINDER$1,750
Cylinder seal3–4TSPGBK3CYLSEAL$159
Cylinder seal5–6.5T and 7–9TSPGBK5-8CYLSEAL$189
Cylinder seal12–16TSPGBK12CYLSEAL$210
Cylinder seal20–23TSPGBK20CYLSEAL$295
Tooth and retainer (set)Grab bucketsSPTOOTHK18S$29
Tooth adaptor3–8TSPGBKESCOE18ADAPTOR$45
Prices ex GST.

Videos

James from AR Equipment explains the grab bucket: pulling stumps and footings, land clearing, demolition and farm work, and the larger jaw opening.
The AR Equipment grab bucket working on an excavator.
A short look at the AR Equipment grab bucket.

In stock, well serviced and supported

Fully backed, serviced, in stock and ready to go. We’re fully backed here in Australia with parts and service, and we have a full machine shop at Burnside QLD. In stock, usually dispatched same day from Burnside. Uncommon fitments built to order at our Burnside workshop take a little longer, and we’ll give you a date when you order.

Warranty

2-year warranty covering cylinder and structural failure. Hoses aren’t covered. Full terms are in our Terms and Conditions.

Designed in Australia, assembled at Burnside

Designed and engineered in Australia, with final assembly at our Burnside QLD workshop.

Talk to us

AR Equipment Pty Ltd, Burnside QLD. Supplying attachments since 2014, with over 50 years of combined experience. Call 1300 441 121, Monday to Friday 7:30am to 5:00pm, or request a quote on this page.

Also see our Gen 2 rotating grab, rotating demolition sorting grab, single ram grab, which grab should I choose?, all grab buckets and all excavator grabs.

Frequently asked questions

What is a grab bucket?

A grab bucket is an excavator bucket with a hydraulic jaw that closes over the load. It digs like a bucket and grabs and holds like a grab, so one attachment does both. Ours have interchangeable teeth, a protected cylinder and a wide-opening jaw.

What is the difference between a grab bucket and a grab?

A grab bucket is built on a bucket, so it can dig, trench and pull as well as grab. The strength is in the bottom end of the bucket, which connects directly to the excavator’s hitch. A grab such as our single ram grab or rotating grab is built to grab and hold, and the rotating ones turn the load.

What can an excavator grab bucket be used for?

Land clearing, demolition, recycling, civil and farm work. It grabs timber and waste, knocks trees over, digs stumps out, pulls concrete footings out of the ground and digs trenches, without changing attachments.

Can a grab bucket pull out stumps and concrete footings?

Yes. The strength is in the bottom end of the bucket, which connects directly to the hitch of the excavator, so you can pull with it. You can pull a tree stump or a concrete footing out of the ground.

Can I dig with a grab bucket?

Yes. You can dig stumps out of the ground or dig a trench if you need to, and you don’t have to change over to another bucket.

Is a grab bucket good for farm work and land clearing?

It’s popular for both. On a farm you only need to carry one attachment when you’re working a long way from the shed: grab and knock trees over, dig the stumps out and dig a trench with the same bucket.

How much does a grab bucket cost?

Prices are ex GST: 3–4T $2,850, 5–6.5T $3,750, 7–9T $4,500, 12–16T $7,500, 20–23T $9,990 and 25–30T $10,599. The head bracket, hoses and couplers are included.

What sizes of grab bucket do you have?

Six sizes for excavators from 3 to 30 tonnes: 3–4T, 5–6.5T, 7–9T, 12–16T, 20–23T and 25–30T. Choose your excavator size on this page or call us and we’ll match the bucket to your machine.

Which grab bucket size suits my excavator?

Match the bucket to your excavator’s operating weight: the 3–4T suits 3 to 4 tonne machines, the 5–6.5T suits 5 to 6.5 tonnes, the 7–9T suits 7 to 9 tonnes, the 12–16T suits 12 to 16 tonnes, the 20–23T suits 20 to 23 tonnes and the 25–30T suits 25 to 30 tonnes. Send us your make, model and pin size and we’ll confirm the size.

How big are the openings and how heavy are the buckets?

3–4T: 740 mm opening, 420 mm wide, 150 kg. 5–6.5T: 1,305 mm, 575 mm wide, 260 kg. 7–9T: 1,305 mm, 575 mm wide, 280 kg. 12–16T: 1,560 mm, 620 mm wide, 570 kg. 20–23T: 1,875 mm, 750 mm wide, 860 kg. 25–30T: 1,875 mm, 750 mm wide, 900 kg, the same size as the 20–23T in a heavier-duty build.

Is the jaw opening bigger than a single ram grab?

Yes. The jaws have a larger opening than a single ram grab, so you can pick up bigger piles of timber or bigger piles of waste in one bite. See our single ram grab if you only need to grab and hold.

Grab bucket or rotating grab: which should I buy?

Buy the grab bucket if you want to dig, pull and grab with one attachment. Buy a rotating grab, the Gen 2 or the demolition sorting grab, if you want to turn the load, for demolition, sorting or timber work. Our guide, which grab should I choose, compares all three.

Does a grab bucket rotate?

No. The grab bucket is a fixed attachment. It connects directly to the hitch of the excavator, which is what lets you pull with it. For continuous 360° rotation, look at our Gen 2 rotating grab.

What is included with the grab bucket?

The head bracket, hoses and couplers, plus interchangeable teeth and a protected cylinder. Tell us your machine make, model and pin size so the pins match your excavator.

Can I replace the teeth?

Yes, the teeth are interchangeable. A tooth and retainer set is $29 ex GST (SPTOOTHK18S) and a tooth adaptor for the 3–8T is $45 ex GST (SPGBKESCOE18ADAPTOR).

What hydraulics does it need?

One auxiliary hydraulic circuit opens and closes the jaw. The oil flow is the same as our single ram grabs: 3–4T 20 L/min, 5–6.5T 30, 7–9T 40, 12–16T 60, 20–23T 80 and 25–30T 90 L/min. We supply the hoses and couplers. Send us your make and model and we’ll confirm the hydraulic set-up before you order.

What pressure are the cylinders rated to?

The cylinders are rated to 5,000 psi, like every AR Equipment hydraulic grab, and they’re protected on the bucket.

What warranty does a grab bucket have?

2 years on cylinder and structural failure. Hoses aren’t covered. Full terms are in our Terms and Conditions.

What spare parts can I buy, and what do they cost?

Cylinders from $750 (3–4T) to $1,750 (12–16T, 20–23T and 25–30T), cylinder seals from $159 to $295, a tooth and retainer set for $29 and a tooth adaptor for $45, all ex GST. Part codes are in the spare parts table on this page.

What is the grab bucket made of?

The wear areas, which are the cutting edge, the side cheek plates and the wear strips, are NM400, a 400 grade wear-resistant steel. The head bracket is Q345 steel.

Where is the grab bucket made?

Designed and engineered in Australia, with final assembly at our Burnside QLD workshop.

Is a grab bucket the same as a grapple bucket?

Yes, they’re two names for the same type of attachment: a bucket with a hydraulic jaw that closes onto the load. Searches also call it a bucket grab.

Is there a grab bucket for a mini excavator?

Yes. The 3–4T grab bucket suits 3 to 4 tonne excavators and starts at $2,850 ex GST. It’s 740 mm open, 420 mm wide and 150 kg.

Are grab buckets in stock?

Yes. In stock, usually dispatched same day from Burnside. Uncommon fitments built to order at our Burnside workshop take a little longer, and we’ll give you a date when you order.

How do I order a grab bucket?

Choose your excavator size and request a quote on this page, or call 1300 441 121, Monday to Friday 7:30am to 5:00pm. Tell us your machine make, model and pin size.

Which grab should I choose?

All four have cylinders rated to 5,000 psi. The difference is the job each one is built for.

Gen 2 rotating grabRotating demolition sorting grabGrab bucketTwin ram grab
Best forAll-purpose: demolition, sorting, sandstone block walls, timber land clearing, timber sorting and feeding chippersDemolition and waste work: sorting fine material and bunching loose rubbishDigging, grabbing and pulling stumps and footings: land clearing, demolition and farm workDedicated grab work: timber, rock and tight rubbish, without rotation
JawsBox tine on curved plates, closes to 30–50 mmWide-opening, curved gathering jaws with a bolt-on cutting edgeWide-opening jaws, larger than a single ram grab, with interchangeable teethBox tine on curved plates, a cylinder on each jaw, closes to 30–50 mm
Sorting very fine materialYesBest: the flat bolt-on edge gives a fine pinch pointNo: built to dig, grab and pullCloses tight on small pieces; the flat bolt-on edge of the demolition grab is best for the finest material
Digs and pulls stumpsNot what it is built forNot what it is built forYes: connects directly to the hitchNot what it is built for
RotationContinuous 360°, Danfoss motorContinuous 360°, Danfoss motorNone: fixedNone: fixed
Sizes (tonnes)5–6.5, 7–9, 12–16, 20–305–8, 12–16, 20–303–4, 5–6.5, 7–9, 12–16, 20–23, 25–305–6.5, 7–9, 12–16, 20–30
Price from (ex GST)$9,500 (5–6.5T)$11,990 (5–8T)$2,850 (3–4T)$6,500 (5–6.5T)
Warranty2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)

The grab bucket is the one to buy if you want to dig, grab and pull with one attachment. It doesn’t rotate. If you want to turn the load, choose the Gen 2 rotating grab for all-purpose demolition, sorting and timber work, or the rotating demolition sorting grab for fine sorting and loose rubbish. For dedicated grab work without rotation, see the twin ram grab.

Not sure? Read which grab should I choose, request a quote or call 1300 441 121 and we’ll match the right grab to your excavator.

Hydraulic Excavator Grab Buckets

$2,850.00 $10,599.00 ex-GST

Request a Quote

On Page Quote Request

SKU: N/A

Category: Excavator Grabs

Need Finance?

Use our finance calculator to estimate your repayments.

Estimated monthly repayment range:
— to — per month

Disclaimer: Repayments are indicative only and subject to approval and credit assessment.

Key Features

  • Digs, grabs and pulls: one attachment for stumps, footings, timber and waste
  • Strong bottom end connects directly to the excavator hitch, so you can pull with it
  • Wide-opening jaws, larger than a single ram grab
  • Interchangeable teeth and a protected cylinder rated to 5,000 psi
  • NM400 wear areas: cutting edge, side cheek plates and wear strips
  • Head bracket (Q345 steel), hoses and couplers included
  • One auxiliary circuit
  • Designed and engineered in Australia, with final assembly at our Burnside QLD workshop.
  • Six sizes for 3–30T excavators, from $2,850 ex GST
  • Fully backed, serviced, in stock and ready to go.

Hydraulic Excavator Grab Buckets

$2,850.00 $10,599.00 ex-GST

SKU: N/A
Request a Quote

Quote Request

Need Finance?

Use our finance calculator to estimate your repayments.

Estimated monthly repayment range:
— to — per month

Disclaimer: Repayments are indicative only and subject to approval and credit assessment.

Key Features

  • Digs, grabs and pulls: one attachment for stumps, footings, timber and waste
  • Strong bottom end connects directly to the excavator hitch, so you can pull with it
  • Wide-opening jaws, larger than a single ram grab
  • Interchangeable teeth and a protected cylinder rated to 5,000 psi
  • NM400 wear areas: cutting edge, side cheek plates and wear strips
  • Head bracket (Q345 steel), hoses and couplers included
  • One auxiliary circuit
  • Designed and engineered in Australia, with final assembly at our Burnside QLD workshop.
  • Six sizes for 3–30T excavators, from $2,850 ex GST
  • Fully backed, serviced, in stock and ready to go.

Product Overview

Get a quote or call 1300 441 121

Hydraulic grab bucket that digs, grabs and pulls: six sizes for 3 to 30 tonne excavators.

The strong bottom end connects directly to your excavator’s hitch, so you can pull stumps and concrete footings out of the ground, then grab timber or waste with a wide-opening jaw that’s larger than a single ram grab. NM400 wear areas, interchangeable teeth, a protected 5,000 psi cylinder, and head bracket, hoses and couplers included. One auxiliary circuit. From $2,850 ex GST. 2-year warranty on cylinder and structural failure.

Fully backed, serviced, in stock and ready to go. In stock, usually dispatched same day from Burnside.

Model3–4T grab bucket5–6.5T grab bucket7.5–9T grab bucket12–16T grab bucket20–23T grab bucket25–30T grab bucket
Excavator size3–4 tonnes5–6.5 tonnes7.5–9 tonnes12–16 tonnes20–23 tonnes25–30 tonnes
Weight150 kg260 kg280 kg570 kg860 kg900 kg
Maximum jaw opening740 mm1,305 mm1,305 mm1,560 mm1,875 mm1,875 mm
Width420 mm575 mm575 mm620 mm750 mm750 mm
Wear areasNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear strips
Head bracketQ345 steel, includedQ345 steel, includedQ345 steel, includedQ345 steel, includedQ345 steel, includedQ345 steel, included
TeethInterchangeableInterchangeableInterchangeableInterchangeableInterchangeableInterchangeable
Oil flow20 L/min30 L/min40 L/min60 L/min80 L/min90 L/min
Auxiliary circuitsOneOneOneOneOneOne
CylinderProtected, rated to 5,000 psiProtected, rated to 5,000 psiProtected, rated to 5,000 psiProtected, rated to 5,000 psiProtected, rated to 5,000 psiProtected, rated to 5,000 psi
IncludedHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplers
Warranty2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)
Price (ex GST)$2,850$3,750$4,500$7,500$9,990$10,599
Part code (Xero)ARE3-4TGBARE5-6.5TGBARE7.5-9TGBARE12-16TGBARE20-23TGBARE25-30TGB

The AR Equipment grab bucket is a hydraulic excavator bucket with a jaw that closes over the load, so one attachment digs, grabs and pulls. The strong bottom end of the bucket connects directly to the hitch of your excavator, which means you can pull with it: pull a tree stump or a concrete footing out of the ground, then grab timber or waste with a wide jaw opening that’s larger than a single ram grab.

Six sizes for 3 to 30 tonne excavators: 3–4T at $2,850, 5–6.5T at $3,750, 7–9T at $4,500, 12–16T at $7,500, 20–23T at $9,990 and 25–30T at $10,599, all ex GST, with the head bracket, hoses and couplers included. Fully backed, serviced, in stock and ready to go.

Grab bucket specifications

Model3–4T grab bucket5–6.5T grab bucket7–9T grab bucket12–16T grab bucket20–23T grab bucket25–30T grab bucket
Excavator size3–4 tonnes5–6.5 tonnes7–9 tonnes12–16 tonnes20–23 tonnes25–30 tonnes
Weight150 kg260 kg280 kg570 kg860 kg900 kg
Maximum jaw opening740 mm1,305 mm1,305 mm1,560 mm1,875 mm1,875 mm
Width420 mm575 mm575 mm620 mm750 mm750 mm
Wear areasNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear stripsNM400: cutting edge, side cheek plates and wear strips
Head bracketQ345 steel, includedQ345 steel, includedQ345 steel, includedQ345 steel, includedQ345 steel, includedQ345 steel, included
TeethInterchangeableInterchangeableInterchangeableInterchangeableInterchangeableInterchangeable
Oil flow20 L/min30 L/min40 L/min60 L/min80 L/min90 L/min
Auxiliary circuitsOneOneOneOneOneOne
CylinderProtected, rated to 5,000 psiProtected, rated to 5,000 psiProtected, rated to 5,000 psiProtected, rated to 5,000 psiProtected, rated to 5,000 psiProtected, rated to 5,000 psi
IncludedHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplersHead bracket, hoses and couplers
Warranty2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)
Price (ex GST)$2,850$3,750$4,500$7,500$9,990$10,599
Part code (Xero)ARE3-4TGBARE5-6.5TGBARE7-9TGBARE12-16TGBARE20-23TGBARE25-30TGB
Match the bucket to your excavator’s weight. Send us your make, model and pin size and we’ll confirm the size and hydraulic set-up before you order.

Built to dig, grab and pull

Strong bottom end, direct to the hitch

The strength of the grab bucket is in the bottom end of the bucket, which connects directly to the hitch of the excavator. That’s what lets you pull with it. You can pull a tree stump out of the ground, or a concrete footing.

Wide-opening jaws

The jaws have a larger opening than a single ram grab, so you can pick up bigger piles of timber or bigger piles of waste in a single bite. A hydraulic jaw (grab thumb) closes over the load.

NM400 wear areas and a Q345 head bracket

The wear areas, which are the cutting edge, the side cheek plates and the wear strips, are NM400, a 400 grade wear-resistant steel, like the jaws on our other grabs. The head bracket is Q345 steel, and it’s included.

Interchangeable teeth and a protected cylinder

The teeth are interchangeable, so you replace a worn tooth instead of the bucket. The cylinder is protected and rated to 5,000 psi, like every AR Equipment hydraulic grab.

Hydraulic requirements

  • Auxiliary circuits: one, to open and close the jaw.
  • Oil flow: 20 L/min (3–4T), 30 L/min (5–6.5T), 40 L/min (7–9T), 60 L/min (12–16T), 80 L/min (20–23T), 90 L/min (25–30T). Same as our single ram grabs.
  • Cylinder: protected, rated to 5,000 psi.
  • Supplied: head bracket, hoses and couplers.
  • Send us your make, model and pin size and we’ll confirm the hydraulic set-up and the pins before you order.

Grab bucket vs single ram grab vs rotating grab

Grab bucketSingle ram grabRotating grab (Gen 2, demolition)
Best forDigging, grabbing and pulling stumps and footings with one attachmentLogs, rock and general handlingTurning the load: demolition, sorting, timber
Pulls stumps and footingsYes: the strong bottom end connects directly to the excavator hitchNot what it is built forNot what it is built for
Digs a trenchYesNot what it is built forNot what it is built for
RotationNo: fixedNo: fixedContinuous 360°
Jaw openingLarger than a single ram grabSee the single ram grab pageSee the grab pages
TeethInterchangeableSee the single ram grab pageBox tine or bolt-on edge

Which size suits your excavator?

  • 3–4T: 3 to 4 tonne excavators. 150 kg, 740 mm opening, 420 mm wide. 20 L/min. $2,850 ex GST.
  • 5–6.5T: 5 to 6.5 tonne excavators. 260 kg, 1,305 mm opening, 575 mm wide. 30 L/min. $3,750 ex GST.
  • 7–9T: 7 to 9 tonne excavators. 280 kg, 1,305 mm opening, 575 mm wide. 40 L/min. $4,500 ex GST.
  • 12–16T: 12 to 16 tonne excavators. 570 kg, 1,560 mm opening, 620 mm wide. 60 L/min. $7,500 ex GST.
  • 20–23T: 20 to 23 tonne excavators. 860 kg, 1,875 mm opening, 750 mm wide. 80 L/min. $9,990 ex GST.
  • 25–30T: 25 to 30 tonne excavators. 900 kg, 1,875 mm opening, 750 mm wide. 90 L/min. $10,599 ex GST. The same size as the 20–23T in a heavier-duty build.
  • Not sure? Send us your make, model and pin size and we’ll confirm the size.

Where it works

  • Land clearing: knock trees over, dig stumps out and grab the timber
  • Demolition and recycling: pull concrete footings and grab waste
  • Civil and earthmoving: digging and trenching without changing over
  • Farm work: one attachment for trees, stumps and trenches
  • Removing tough footings and root systems
  • Moving large rocks

Spare parts

PartSuitsPart codePrice (ex GST)
Cylinder3–4TSPGBK3CYLINDER$750
Cylinder5–6.5T and 7–9TSPGBK5-8CYLINDER$899
Cylinder12–16TSPGBK12CYLINDER$1,750
Cylinder20–23TSPGBK20CYLINDER$1,750
Cylinder seal3–4TSPGBK3CYLSEAL$159
Cylinder seal5–6.5T and 7–9TSPGBK5-8CYLSEAL$189
Cylinder seal12–16TSPGBK12CYLSEAL$210
Cylinder seal20–23TSPGBK20CYLSEAL$295
Tooth and retainer (set)Grab bucketsSPTOOTHK18S$29
Tooth adaptor3–8TSPGBKESCOE18ADAPTOR$45
Prices ex GST.

Videos

https://www.youtube.com/watch?v=P6kh8AxGpCM
James from AR Equipment explains the grab bucket: pulling stumps and footings, land clearing, demolition and farm work, and the larger jaw opening.
https://www.youtube.com/watch?v=OHAThc81zSk
The AR Equipment grab bucket working on an excavator.
https://www.youtube.com/watch?v=MGtrPsx4Ydw
A short look at the AR Equipment grab bucket.

In stock, well serviced and supported

Fully backed, serviced, in stock and ready to go. We’re fully backed here in Australia with parts and service, and we have a full machine shop at Burnside QLD. In stock, usually dispatched same day from Burnside. Uncommon fitments built to order at our Burnside workshop take a little longer, and we’ll give you a date when you order.

Warranty

2-year warranty covering cylinder and structural failure. Hoses aren’t covered. Full terms are in our Terms and Conditions.

Designed in Australia, assembled at Burnside

Designed and engineered in Australia, with final assembly at our Burnside QLD workshop.

Talk to us

AR Equipment Pty Ltd, Burnside QLD. Supplying attachments since 2014, with over 50 years of combined experience. Call 1300 441 121, Monday to Friday 7:30am to 5:00pm, or request a quote on this page.

Also see our Gen 2 rotating grab, rotating demolition sorting grab, single ram grab, which grab should I choose?, all grab buckets and all excavator grabs.

Frequently asked questions

What is a grab bucket?

A grab bucket is an excavator bucket with a hydraulic jaw that closes over the load. It digs like a bucket and grabs and holds like a grab, so one attachment does both. Ours have interchangeable teeth, a protected cylinder and a wide-opening jaw.

What is the difference between a grab bucket and a grab?

A grab bucket is built on a bucket, so it can dig, trench and pull as well as grab. The strength is in the bottom end of the bucket, which connects directly to the excavator’s hitch. A grab such as our single ram grab or rotating grab is built to grab and hold, and the rotating ones turn the load.

What can an excavator grab bucket be used for?

Land clearing, demolition, recycling, civil and farm work. It grabs timber and waste, knocks trees over, digs stumps out, pulls concrete footings out of the ground and digs trenches, without changing attachments.

Can a grab bucket pull out stumps and concrete footings?

Yes. The strength is in the bottom end of the bucket, which connects directly to the hitch of the excavator, so you can pull with it. You can pull a tree stump or a concrete footing out of the ground.

Can I dig with a grab bucket?

Yes. You can dig stumps out of the ground or dig a trench if you need to, and you don’t have to change over to another bucket.

Is a grab bucket good for farm work and land clearing?

It’s popular for both. On a farm you only need to carry one attachment when you’re working a long way from the shed: grab and knock trees over, dig the stumps out and dig a trench with the same bucket.

How much does a grab bucket cost?

Prices are ex GST: 3–4T $2,850, 5–6.5T $3,750, 7–9T $4,500, 12–16T $7,500, 20–23T $9,990 and 25–30T $10,599. The head bracket, hoses and couplers are included.

What sizes of grab bucket do you have?

Six sizes for excavators from 3 to 30 tonnes: 3–4T, 5–6.5T, 7–9T, 12–16T, 20–23T and 25–30T. Choose your excavator size on this page or call us and we’ll match the bucket to your machine.

Which grab bucket size suits my excavator?

Match the bucket to your excavator’s operating weight: the 3–4T suits 3 to 4 tonne machines, the 5–6.5T suits 5 to 6.5 tonnes, the 7–9T suits 7 to 9 tonnes, the 12–16T suits 12 to 16 tonnes, the 20–23T suits 20 to 23 tonnes and the 25–30T suits 25 to 30 tonnes. Send us your make, model and pin size and we’ll confirm the size.

How big are the openings and how heavy are the buckets?

3–4T: 740 mm opening, 420 mm wide, 150 kg. 5–6.5T: 1,305 mm, 575 mm wide, 260 kg. 7–9T: 1,305 mm, 575 mm wide, 280 kg. 12–16T: 1,560 mm, 620 mm wide, 570 kg. 20–23T: 1,875 mm, 750 mm wide, 860 kg. 25–30T: 1,875 mm, 750 mm wide, 900 kg, the same size as the 20–23T in a heavier-duty build.

Is the jaw opening bigger than a single ram grab?

Yes. The jaws have a larger opening than a single ram grab, so you can pick up bigger piles of timber or bigger piles of waste in one bite. See our single ram grab if you only need to grab and hold.

Grab bucket or rotating grab: which should I buy?

Buy the grab bucket if you want to dig, pull and grab with one attachment. Buy a rotating grab, the Gen 2 or the demolition sorting grab, if you want to turn the load, for demolition, sorting or timber work. Our guide, which grab should I choose, compares all three.

Does a grab bucket rotate?

No. The grab bucket is a fixed attachment. It connects directly to the hitch of the excavator, which is what lets you pull with it. For continuous 360° rotation, look at our Gen 2 rotating grab.

What is included with the grab bucket?

The head bracket, hoses and couplers, plus interchangeable teeth and a protected cylinder. Tell us your machine make, model and pin size so the pins match your excavator.

Can I replace the teeth?

Yes, the teeth are interchangeable. A tooth and retainer set is $29 ex GST (SPTOOTHK18S) and a tooth adaptor for the 3–8T is $45 ex GST (SPGBKESCOE18ADAPTOR).

What hydraulics does it need?

One auxiliary hydraulic circuit opens and closes the jaw. The oil flow is the same as our single ram grabs: 3–4T 20 L/min, 5–6.5T 30, 7–9T 40, 12–16T 60, 20–23T 80 and 25–30T 90 L/min. We supply the hoses and couplers. Send us your make and model and we’ll confirm the hydraulic set-up before you order.

What pressure are the cylinders rated to?

The cylinders are rated to 5,000 psi, like every AR Equipment hydraulic grab, and they’re protected on the bucket.

What warranty does a grab bucket have?

2 years on cylinder and structural failure. Hoses aren’t covered. Full terms are in our Terms and Conditions.

What spare parts can I buy, and what do they cost?

Cylinders from $750 (3–4T) to $1,750 (12–16T, 20–23T and 25–30T), cylinder seals from $159 to $295, a tooth and retainer set for $29 and a tooth adaptor for $45, all ex GST. Part codes are in the spare parts table on this page.

What is the grab bucket made of?

The wear areas, which are the cutting edge, the side cheek plates and the wear strips, are NM400, a 400 grade wear-resistant steel. The head bracket is Q345 steel.

Where is the grab bucket made?

Designed and engineered in Australia, with final assembly at our Burnside QLD workshop.

Is a grab bucket the same as a grapple bucket?

Yes, they’re two names for the same type of attachment: a bucket with a hydraulic jaw that closes onto the load. Searches also call it a bucket grab.

Is there a grab bucket for a mini excavator?

Yes. The 3–4T grab bucket suits 3 to 4 tonne excavators and starts at $2,850 ex GST. It’s 740 mm open, 420 mm wide and 150 kg.

Are grab buckets in stock?

Yes. In stock, usually dispatched same day from Burnside. Uncommon fitments built to order at our Burnside workshop take a little longer, and we’ll give you a date when you order.

How do I order a grab bucket?

Choose your excavator size and request a quote on this page, or call 1300 441 121, Monday to Friday 7:30am to 5:00pm. Tell us your machine make, model and pin size.

Which grab should I choose?

All four have cylinders rated to 5,000 psi. The difference is the job each one is built for.

Gen 2 rotating grabRotating demolition sorting grabGrab bucketTwin ram grab
Best forAll-purpose: demolition, sorting, sandstone block walls, timber land clearing, timber sorting and feeding chippersDemolition and waste work: sorting fine material and bunching loose rubbishDigging, grabbing and pulling stumps and footings: land clearing, demolition and farm workDedicated grab work: timber, rock and tight rubbish, without rotation
JawsBox tine on curved plates, closes to 30–50 mmWide-opening, curved gathering jaws with a bolt-on cutting edgeWide-opening jaws, larger than a single ram grab, with interchangeable teethBox tine on curved plates, a cylinder on each jaw, closes to 30–50 mm
Sorting very fine materialYesBest: the flat bolt-on edge gives a fine pinch pointNo: built to dig, grab and pullCloses tight on small pieces; the flat bolt-on edge of the demolition grab is best for the finest material
Digs and pulls stumpsNot what it is built forNot what it is built forYes: connects directly to the hitchNot what it is built for
RotationContinuous 360°, Danfoss motorContinuous 360°, Danfoss motorNone: fixedNone: fixed
Sizes (tonnes)5–6.5, 7–9, 12–16, 20–305–8, 12–16, 20–303–4, 5–6.5, 7–9, 12–16, 20–23, 25–305–6.5, 7–9, 12–16, 20–30
Price from (ex GST)$9,500 (5–6.5T)$11,990 (5–8T)$2,850 (3–4T)$6,500 (5–6.5T)
Warranty2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)

The grab bucket is the one to buy if you want to dig, grab and pull with one attachment. It doesn’t rotate. If you want to turn the load, choose the Gen 2 rotating grab for all-purpose demolition, sorting and timber work, or the rotating demolition sorting grab for fine sorting and loose rubbish. For dedicated grab work without rotation, see the twin ram grab.

Not sure? Read which grab should I choose, request a quote or call 1300 441 121 and we’ll match the right grab to your excavator.

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Hydraulic Excavator Grab Buckets”

Your email address will not be published. Required fields are marked *


Enquire about our 2025 product catalogue

Access our comprehensive excavator and skid steer equipment catalogue, featuring complete specifications, pricing, and technical details for our full range of attachments and machinery solutions.

Get In Touch

Please fill out the form below and one of our friendly staff will get back to you

Quick Enquiry

Free Freight banner images with SkidSteer Slasher attachment
Black Friday

FREE SHIPPING

Orders placed between now and Cyber Monday will have free shipping to your nearest depot