Which Excavator Grab Should I Choose?

Excavator rotating grab Gen 2 box tine jaws

Short answer: if you want one rotating grab that does everything, buy the Gen 2. If your work is specifically demolition, buy the rotating demolition sorting grab. If you want to dig, pull stumps and grab with one attachment, buy the grab bucket. If you don’t need rotation and do dedicated grab work, buy the twin ram grab. Here’s how to decide, based on what we see customers do with each one.

The four grabs in the AR Equipment range

We build two rotating grabs for excavators, a twin ram grab and a grab bucket, and they suit different work. The Gen 2 is our all-purpose design. The demolition sorting grab is a specialist. The twin ram grab is the Gen 2 without the rotator. The grab bucket doesn’t rotate: it’s a bucket with a hydraulic jaw that digs, grabs and pulls. All four run cylinders rated to 5,000 psi, and all four come with a 2-year warranty on cylinder and structural failure (hoses are never covered). You’ll find all our grabs on the excavator grabs page.

Gen 2 rotating grabRotating demolition sorting grabGrab bucketTwin ram grab
Best forAll-purpose: demolition, sorting, sandstone block walls, timber land clearing, timber sorting and feeding chippersDemolition and waste work: sorting fine material and bunching loose rubbishDigging, grabbing and pulling stumps and footings: land clearing, demolition and farm workDedicated grab work: timber, rock and tight rubbish, without rotation
JawsBox tine on curved plates, closes to 30–50 mmWide-opening, curved gathering jaws with a bolt-on cutting edgeWide-opening jaws, larger than a single ram grab, with interchangeable teethBox tine on curved plates, a cylinder on each jaw, closes to 30–50 mm
Sorting very fine materialYesBest: the flat bolt-on edge gives a fine pinch pointNo: built to dig, grab and pullCloses tight on small pieces; the flat bolt-on edge of the demolition grab is best for the finest material
Digs and pulls stumpsNot what it is built forNot what it is built forYes: connects directly to the hitchNot what it is built for
RotationContinuous 360°, Danfoss motorContinuous 360°, Danfoss motorNone: fixedNone: fixed
Sizes (tonnes)5–6.5, 7–9, 12–16, 20–305–8, 12–16, 20–303–4, 5–6.5, 7.5–9, 12–16, 20–23, 25–305–6.5, 7–9, 12–16, 20–30
Price from (ex GST)$9,500 (5–6.5T)$11,990 (5–8T)$2,850 (3–4T)$6,500 (5–6.5T)
Warranty2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)2 years, cylinder and structural, plus rotator motor and valving (hoses not covered)2 years, cylinder and structural (hoses not covered)2 years, cylinder and structural (hoses not covered)

Choose the Gen 2 for all-purpose work

The Gen 2 excavator rotating grab is the Swiss Army knife that AR Equipment makes. It can do demolition and sorting work, build sandstone block walls, clear timber, sort timber and feed chippers. Its box tine jaws sit on curved plates and close to a 30–50 mm gap depending on size, so it holds small rock and timber as well as big blocks.

That versatility is the reason to pick it if your jobs change week to week. One grab covers a rock wall on Monday, a land clearing job on Wednesday and a strip-out on Friday.

  • Sizes: 5–6.5T, 7–9T, 12–16T and 20–30T
  • Prices ex GST: $9,500, $9,990, $18,990 and $24,990
  • Needs two auxiliary circuits, and a case drain on the 12–16T and 20–30T
  • Head bracket, hoses and couplers included

Rotating grab for land clearing and timber

For timber land clearing and timber sorting, the Gen 2 is the grab to look at. The box tine jaws grip timber, and the rotation lets you turn a log to lie where you want it, or feed it into a chipper, without repositioning the excavator. The same grab then switches straight to rock or block work. If you’re comparing options, our single ram grab is a simpler non-rotating choice for logs and general handling.

Choose the demolition grab for sorting and rubbish

The rotating demolition sorting grab is for more specific demolition work. It has a flat bolt-on edge, which makes it great for sorting very fine material. It also has a wide jaw opening and a wide gathering style in the jaw, so when it closes it bunches loose material like rubbish very well.

That’s why it’s the right sorting grab for waste and demolition: the cutting edge picks the small pieces out and the curved jaws gather the rest. The cylinder and hydraulics are guarded against stray strikes from waste. It’s built with a Danfoss rotation motor and NM400 construction on both jaws and the body.

  • Sizes: 5–8T, 12–16T and 20–30T
  • Prices ex GST: $11,990, $18,990 and $26,990
  • Bolt-on cutting edge for fine sorting
  • Large curved jaws for bulk handling of waste

Choose the grab bucket to dig, grab and pull

The excavator grab bucket is a bucket with a hydraulic jaw, so it digs like a bucket and grabs like a grab. The strength is in the bottom end of the bucket, which connects directly to the hitch of the excavator, so you can pull with it. You can pull a tree stump or a concrete footing out of the ground.

That’s why it’s popular in land clearing and demolition, and even down to farm work. If you’re working a long way from the shed, you’ve got the one attachment with you: grab and knock trees over, dig the stumps out and dig a trench if you need to, without changing over. The jaws open wider than a single ram grab, so you can pick up bigger piles of timber or bigger piles of waste. See all the grab buckets.

  • Sizes: 3–4T, 5–6.5T, 7.5–9T, 12–16T, 20–23T and 25–30T
  • Prices ex GST: $2,850, $3,750, $4,500, $7,500, $9,990 and $10,599
  • NM400 wear areas, interchangeable teeth and a protected cylinder
  • Head bracket, hoses and couplers included, one auxiliary circuit. It does not rotate

Choose the twin ram for dedicated grab work

The twin ram grab has a cylinder on each jaw, which gives it 40% more clamping force than our single ram grabs. Each jaw opens and closes on its own cylinder, so there’s no twisting action, and it opens wider than our single ram grabs and closes tight, to a 30–50 mm gap depending on size.

That makes it a good pick for timber work, where the pinch matters, for handling rock on the tips, and for small branches and rubbish, which stay in the grab and crush down. It’s the same twin cylinder, box tine design as the Gen 2, without the rotator, so it needs one auxiliary circuit and no case drain. When it’s closed it stands upright with a small footprint on the truck.

  • Sizes: 5–6.5T, 7–9T, 12–16T and 20–30T
  • Prices ex GST: $6,500, $7,500, $14,990 and $14,990
  • One auxiliary circuit, no case drain. It does not rotate
  • Head bracket, hoses and couplers included

Which grab: how to pick

Ask yourself what you do most, and whether you need to turn the load:

  • Mixed jobs, rock, timber, blocks and some demolition: Gen 2.
  • Land clearing and timber work where you turn logs: Gen 2.
  • Sandstone block walls: Gen 2.
  • Loose rubbish, waste and fine sorting: demolition grab.
  • Mostly demolition and nothing else: demolition grab.
  • Digging stumps out, pulling stumps and footings, trenching and grabbing with one attachment: grab bucket.
  • Farm work and land clearing on a budget: grab bucket.
  • Timber, rock and tight rubbish where you don’t need rotation: twin ram grab.

Not sure which one suits your machine? Send us your excavator make and model on the quote form or call 1300 441 121 (Monday to Friday, 7:30am to 5:00pm). We’ll confirm the size, hydraulics and pins before you order.

Do you need a rotating grab at all?

If the load doesn’t need turning, a fixed grab will do the job for less. The single ram grab starts at $3,750 for 5–6.5T and the grab bucket starts at $2,850 for 3–4T. For more detail on fixed versus rotating, hydraulics and sizing, read our guide to choosing excavator grab attachments.

Backed, serviced and in stock

The Gen 2 is designed and engineered in Australia, prototype-tested on our own machinery, then assembled, flow-bench tested, greased and checked at our Burnside QLD workshop before dispatch. We carry parts and service every grab we sell. In stock, usually dispatched same day from Burnside.

Frequently asked questions

What is the difference between a demolition grab and a rotating grab?

Our demolition grab is a rotating grab too. The real question is which rotating grab. The rotating demolition sorting grab has a flat bolt-on edge and wide gathering jaws built for sorting fine material and bunching rubbish. The Gen 2 has box tine jaws and does everything, including demolition.

What is the best rotating grab for an excavator?

For an all-purpose rotating grab, you can’t go past the Gen 2. It does demolition, sorting, sandstone block wall work, timber land clearing, timber sorting and feeding chippers. For a more specific demolition purpose, the rotating demolition sorting grab is best.

Which rotating grab is best for land clearing?

The Gen 2. Its box tine jaws and continuous 360° rotation suit timber land clearing and timber sorting, and it can feed a chipper as well. If you also need to dig stumps out and pull them, a grab bucket does that without rotation.

Which grab is best for sorting fine material?

The rotating demolition sorting grab. The flat bolt-on edge gives a fine pinch point, so it picks up small pieces cleanly.

Can the Gen 2 do demolition work?

Yes. Demolition and sorting are two of the jobs it was designed for. If demolition is nearly all you do, especially loose rubbish and fine sorting, the demolition grab is the more specialised tool.

What sizes and prices are available?

Gen 2: 5–6.5T $9,500, 7–9T $9,990, 12–16T $18,990, 20–30T $24,990. Twin ram grab: 5–6.5T $6,500, 7–9T $7,500, 12–16T $14,990, 20–30T $14,990. Rotating demolition sorting grab: 5–8T $11,990, 12–16T $18,990, 20–30T $26,990. Grab bucket: 3–4T $2,850, 5–6.5T $3,750, 7.5–9T $4,500, 12–16T $7,500, 20–23T $9,990, 25–30T $10,599. All prices ex GST.

Do I need a rotating grab, or will a fixed grab do?

If you don’t need to turn the load, a fixed grab is simpler and cheaper. Our single ram grab starts at $3,750 for 5–6.5T, and a grab bucket starts at $2,850 for 3–4T. A rotating grab earns its price when you want to turn a log, block or slab to the right angle without repositioning the machine.

What is a grab bucket and when should I choose one?

A grab bucket is an excavator bucket with a hydraulic jaw. Choose it when you want to dig, grab and pull with one attachment: pulling stumps and concrete footings, knocking trees over and digging trenches. The strong bottom end connects directly to the excavator’s hitch, so you can pull with it.

Does a grab bucket rotate?

No, it’s a fixed attachment, which is what lets it connect directly to the hitch. For continuous 360° rotation choose the Gen 2 or the demolition sorting grab.

Grab bucket or single ram grab?

The grab bucket has a larger jaw opening than a single ram grab, so it picks up bigger piles of timber or waste, and it can dig and pull stumps. The single ram grab is the simpler choice for logs, rock and general handling.

Which is the cheapest of the four?

The grab bucket, from $2,850 ex GST for 3–4T. The twin ram grab starts at $6,500, the Gen 2 at $9,500 and the rotating demolition sorting grab at $11,990, all ex GST.

What is a twin ram grab and when should I choose one?

A twin ram grab has a cylinder on each jaw. Choose it for dedicated grab work without rotation: timber, rock and tight rubbish. It has 40% more clamping force than our single ram grabs, opens wider and closes tighter.

Does the twin ram grab rotate?

No, it has a fixed head. It’s the Gen 2 without the rotator, and it needs one auxiliary circuit and no case drain. For continuous 360° rotation choose the Gen 2 or the demolition sorting grab.

Twin ram grab or single ram grab?

The twin ram has 40% more clamping force than our single ram grabs, opens wider and closes tighter, and each jaw is driven by its own cylinder. For general contracting a single ram grab does a fantastic job; for dedicated grab work the twin ram is worth the extra money.

Free Freight banner images with SkidSteer Slasher attachment
Black Friday

FREE SHIPPING

Orders placed between now and Cyber Monday will have free shipping to your nearest depot