HMB Skid Steer Post Rammer (Post Driver), 50–90HP

HMB skid steer post rammer (post driver) for 50 to 90 horsepower skid steers, co-branded with AR Equipment, the Australian distributor.

200 mm post cup, post driver moil (68 mm shaft), 2 m hoses, couplers and skid steer plate included, nitrogen pre-charged. Same unit as our HMB rock breaker. $7,990 ex GST.

In stock, usually dispatched same day from Burnside. 2-year warranty covering structural failure, with the piston covered for failure, not wear and tear (hoses not covered).

ModelARE 50-90HP
Skid steer (HP)50-90
Weight (kg)360
Oil flow required (L/min)35-60
Working pressure (psi)1900-2200
Impact rate (bpm)500-900
Impact energy (joules)800
Moil shaft diameter (mm)68
Post cup (mm)200
Hose diameter (inch)1/2
Included2 m hoses, couplers, skid steer plate, post driver moil, 200 mm post cup, tool box with spare consumables, nitrogen pre-charged, operator's manual
Price (ex GST)$7,990

$7,990 ex GST. 50–90HP skid steers. HMB post rammer, AR Equipment is the Australian distributor. 200 mm post cup, hoses and couplers included. 2-year warranty. In stock, usually dispatched same day from Burnside. Call 1300 441 121 or request a quote on this page.

Stock and dispatch: in stock, usually dispatched same day from Burnside.

Specifications

Model ARE 50-90HP
Skid steer (HP) 50-90
Weight (kg) 360
Oil flow required (L/min) 35-60
Working pressure (psi) 1900-2200
Impact rate (bpm) 500-900
Impact energy (joules) 800
Moil shaft diameter (mm) 68
Post cup (mm) 200
Hose diameter (inch) 1/2
Price (ex GST) $7,990

Key features

  • Co-branded AR Equipment and HMB post rammer, a Korean HMB design, with AR Equipment as the Australian distributor
  • Same unit as our HMB rock breaker: swap the skid steer bracket and it becomes an excavator rock breaker or post rammer
  • Same top and bottom rubber dampeners as the breakers, cushioning the blow and protecting your machine
  • 200 mm post cup and 68 mm moil: handles split posts, timber strainer posts, drill stem and rail iron (leaving a ring you trim off), plus steel pickets and lighter posts
  • 35-60 L/min, 800 joules, 68 mm moil shaft, $7,990 ex GST
  • Skid steer plate, post driver moil, 200 mm cup, 2 m hoses, couplers, tool box with spare consumables and operator’s manual included, nitrogen pre-charged
  • HMB’s own in-house heat treatment and metallurgy department; around 480 HMB breakers and post rammers working across Australia since 2017
  • Assembled, flow-bench tested, greased and checklisted at Burnside, with repairs, rebuilds and genuine parts from our workshop
  • 2-year warranty on structural failure, with the piston covered for failure, not wear and tear

HMB skid steer post rammer for 50 to 90 horsepower machines

The AR Equipment x HMB skid steer post rammer drives fence posts using your skid steer’s auxiliary hydraulics. It suits skid steers rated 50 to 90 horsepower. It includes a skid steer plate, post driver moil, 200 mm post cup, 2 m hoses, couplers, a tool box with spare consumables and the operator’s manual, and arrives nitrogen pre-charged.

Co-branded with HMB, supported by AR Equipment

This is a Korean HMB design. AR Equipment is HMB’s Australian distributor, and around 480 HMB breakers and post rammers are working across Australia since 2017. HMB runs its own state-of-the-art heat treatment and metallurgy department inside its factory. Final assembly, flow-bench testing, greasing and checklist are done at our Burnside workshop on the Sunshine Coast before it ships. Our workshop backs every unit with parts, servicing and repairs.

Silenced body with rubber dampeners

The cartridge is silenced, with the same top and bottom rubber dampeners as our rock breakers. The rubbers cushion the blow, so the percussion is absorbed instead of travelling straight back into the machine. That reduces wear on pins and bushes and is easier on the operator.

One 200 mm cup and a 68 mm moil

The 50-90HP post rammer uses a 200 mm post cup. On timber strainer posts it leaves a ring in the top of the post that you trim off at the end, which makes it very good for rural strainer work.

Why the 68 mm moil matters

The 50-90HP has a 68 mm moil shaft. The 68 mm moil class is what you really need to drive split posts and timber strainer posts. We have tried the smaller model, and smaller rammers marketed for rural fencing don’t have the power to push in split or strainer posts. It also handles everything smaller, including steel pickets and lighter posts.

One unit, more than one job

It is exactly the same unit as our HMB rock breaker, with a mounting plate on the side and the same stud pattern at the top as the rock breaker head. The skid steer bracket can also be swapped so the unit becomes an excavator rock breaker or post rammer.

Power and sizing

Working pressure is 1900-2200 psi. The 50-90HP needs 35-60 L/min and delivers 800 joules at 500-900 bpm with a 68 mm moil shaft and a 200 mm cup. Hose diameter is 1/2 inch. Send us your skid steer make and model and we will confirm the plate and fit before you order.

What is in the box

  • Skid steer plate
  • Post driver moil (68 mm shaft)
  • 200 mm post cup
  • 2 m hoses and couplers
  • A tool box with spare consumables
  • Nitrogen pre-charged, ready to go
  • The operator’s manual

Where a skid steer post rammer earns its keep

  • Rural fencing and strainer assemblies
  • Split post fence lines
  • Steel picket lines and lighter posts

Price

The 50-90HP post rammer is $7,990 ex GST.

In stock, well serviced and supported

In stock, plus genuine parts, and our Burnside workshop services, repairs and rebuilds what we sell. In stock, usually dispatched same day from Burnside. Most in-stock attachments leave Burnside the same day. Uncommon fitments built to order at our Burnside workshop take a little longer, and we’ll give you a date when you order.

Warranty

2-year warranty covering structural failure. The piston is covered for failure, not wear and tear. Hoses are never covered on any attachment.

Talk to us

AR Equipment Pty Ltd, Burnside QLD. Supplying attachments since 2014, with over 50 years of combined experience. Call 1300 441 121, Monday to Friday 7:30am to 5:00pm, or request a quote on this page.

Frequently asked questions

What is a skid steer post rammer?

A skid steer post rammer, also called a post driver, is a hydraulic hammer with a post cup that mounts on a skid steer plate and drives fence posts using the machine’s auxiliary hydraulics.

What skid steer suits the post rammer?

The 50-90HP model suits skid steers rated 50 to 90 horsepower. Check your machine’s auxiliary flow against the spec table, then send us your make and model and we’ll confirm the plate before you order.

Who makes the AR Equipment skid steer post rammer?

It is a co-branded AR Equipment and HMB post rammer. The design is Korean, and AR Equipment is HMB’s Australian distributor. Final assembly, flow-bench testing, greasing and checklist are done at our Burnside workshop.

What oil flow and pressure does it need?

35-60 L/min at a working pressure of 1900-2200 psi.

What is included?

A skid steer plate, a post driver moil (68 mm shaft), a 200 mm post cup, 2 m hoses, couplers, a tool box with spare consumables and the operator’s manual. It arrives nitrogen pre-charged and ready to work.

How much does a skid steer post rammer cost?

$7,990 ex GST. Freight is calculated on your quote or at checkout.

What posts can it drive?

The 50-90HP (68 mm moil) handles split posts, timber strainer posts, drill stem and rail iron, plus steel pickets and lighter posts, all with the 200 mm post cup.

Is the skid steer post rammer strong enough for split and strainer posts?

Yes. The 68 mm moil class is what you really need for split and strainer posts. We have tried the smaller model, and smaller rammers marketed for rural fencing don’t have the power to push in split or strainer posts.

What is the ring left in the top of a strainer post?

On timber strainer posts the cup leaves a ring in the top of the post. You trim it off with a saw at the end, which gives a clean finish and makes the rammer very good for rural strainer work.

Can I run it on an excavator, or as a rock breaker?

Yes. It is exactly the same unit as our HMB rock breaker, and the skid steer bracket can be swapped so the unit becomes an excavator rock breaker or post rammer. The same stud pattern at the top as the rock breaker head lets you change the head bracket.

Does it reduce wear on my skid steer?

Yes. It has the same top and bottom rubber dampeners as our rock breakers, which cushion the blow so the percussion is not sent straight back into the machine.

What warranty does it have?

2 years, covering structural failure. The piston is covered for failure, not wear and tear. Hoses are never covered on any attachment.

Is it in stock?

Yes. In stock, usually dispatched same day from Burnside.

Can I get spare parts and repairs?

Yes. Our Burnside workshop services and repairs what we sell and holds genuine parts.

How do I order or get a quote?

Use the quote form on this page or call 1300 441 121, Monday to Friday 7:30am to 5:00pm.

Need a hammer to break rock? See our HMB skid steer rock breakers.

HMB Skid Steer Post Rammer (Post Driver)

$7,990.00 ex-GST

Request a Quote

On Page Quote Request

SKU: N/A

Category: Skid Steer

Need Finance?

Use our finance calculator to estimate your repayments.

Estimated monthly repayment range:
— to — per month

Disclaimer: Repayments are indicative only and subject to approval and credit assessment.

Key Features

  • Co-branded AR Equipment and HMB post rammer, a Korean HMB design, with AR Equipment as the Australian distributor
  • Same unit as our HMB rock breaker: swap the skid steer bracket and it becomes an excavator rock breaker or post rammer
  • Same top and bottom rubber dampeners as the breakers, cushioning the blow and protecting your machine
  • 200 mm post cup and 68 mm moil: handles split posts, timber strainer posts, drill stem and rail iron (leaving a ring you trim off), plus steel pickets and lighter posts
  • 35-60 L/min, 800 joules, 68 mm moil shaft, $7,990 ex GST
  • Skid steer plate, post driver moil, 200 mm cup, 2 m hoses, couplers, tool box with spare consumables and operator’s manual included, nitrogen pre-charged
  • HMB’s own in-house heat treatment and metallurgy department; around 480 HMB breakers and post rammers working across Australia since 2017
  • Assembled, flow-bench tested, greased and checklisted at Burnside, with repairs, rebuilds and genuine parts from our workshop
  • 2-year warranty on structural failure, with the piston covered for failure, not wear and tear

HMB Skid Steer Post Rammer (Post Driver)

$7,990.00 ex-GST

SKU: N/A
Request a Quote

Quote Request

Need Finance?

Use our finance calculator to estimate your repayments.

Estimated monthly repayment range:
— to — per month

Disclaimer: Repayments are indicative only and subject to approval and credit assessment.

Key Features

  • Co-branded AR Equipment and HMB post rammer, a Korean HMB design, with AR Equipment as the Australian distributor
  • Same unit as our HMB rock breaker: swap the skid steer bracket and it becomes an excavator rock breaker or post rammer
  • Same top and bottom rubber dampeners as the breakers, cushioning the blow and protecting your machine
  • 200 mm post cup and 68 mm moil: handles split posts, timber strainer posts, drill stem and rail iron (leaving a ring you trim off), plus steel pickets and lighter posts
  • 35-60 L/min, 800 joules, 68 mm moil shaft, $7,990 ex GST
  • Skid steer plate, post driver moil, 200 mm cup, 2 m hoses, couplers, tool box with spare consumables and operator’s manual included, nitrogen pre-charged
  • HMB’s own in-house heat treatment and metallurgy department; around 480 HMB breakers and post rammers working across Australia since 2017
  • Assembled, flow-bench tested, greased and checklisted at Burnside, with repairs, rebuilds and genuine parts from our workshop
  • 2-year warranty on structural failure, with the piston covered for failure, not wear and tear

Product Overview

HMB skid steer post rammer (post driver) for 50 to 90 horsepower skid steers, co-branded with AR Equipment, the Australian distributor.

200 mm post cup, post driver moil (68 mm shaft), 2 m hoses, couplers and skid steer plate included, nitrogen pre-charged. Same unit as our HMB rock breaker. $7,990 ex GST.

In stock, usually dispatched same day from Burnside. 2-year warranty covering structural failure, with the piston covered for failure, not wear and tear (hoses not covered).

ModelARE 50-90HP
Skid steer (HP)50-90
Weight (kg)360
Oil flow required (L/min)35-60
Working pressure (psi)1900-2200
Impact rate (bpm)500-900
Impact energy (joules)800
Moil shaft diameter (mm)68
Post cup (mm)200
Hose diameter (inch)1/2
Included2 m hoses, couplers, skid steer plate, post driver moil, 200 mm post cup, tool box with spare consumables, nitrogen pre-charged, operator's manual
Price (ex GST)$7,990

$7,990 ex GST. 50–90HP skid steers. HMB post rammer, AR Equipment is the Australian distributor. 200 mm post cup, hoses and couplers included. 2-year warranty. In stock, usually dispatched same day from Burnside. Call 1300 441 121 or request a quote on this page.

Stock and dispatch: in stock, usually dispatched same day from Burnside.

Specifications

ModelARE 50-90HP
Skid steer (HP)50-90
Weight (kg)360
Oil flow required (L/min)35-60
Working pressure (psi)1900-2200
Impact rate (bpm)500-900
Impact energy (joules)800
Moil shaft diameter (mm)68
Post cup (mm)200
Hose diameter (inch)1/2
Price (ex GST)$7,990

Key features

  • Co-branded AR Equipment and HMB post rammer, a Korean HMB design, with AR Equipment as the Australian distributor
  • Same unit as our HMB rock breaker: swap the skid steer bracket and it becomes an excavator rock breaker or post rammer
  • Same top and bottom rubber dampeners as the breakers, cushioning the blow and protecting your machine
  • 200 mm post cup and 68 mm moil: handles split posts, timber strainer posts, drill stem and rail iron (leaving a ring you trim off), plus steel pickets and lighter posts
  • 35-60 L/min, 800 joules, 68 mm moil shaft, $7,990 ex GST
  • Skid steer plate, post driver moil, 200 mm cup, 2 m hoses, couplers, tool box with spare consumables and operator’s manual included, nitrogen pre-charged
  • HMB’s own in-house heat treatment and metallurgy department; around 480 HMB breakers and post rammers working across Australia since 2017
  • Assembled, flow-bench tested, greased and checklisted at Burnside, with repairs, rebuilds and genuine parts from our workshop
  • 2-year warranty on structural failure, with the piston covered for failure, not wear and tear

HMB skid steer post rammer for 50 to 90 horsepower machines

The AR Equipment x HMB skid steer post rammer drives fence posts using your skid steer’s auxiliary hydraulics. It suits skid steers rated 50 to 90 horsepower. It includes a skid steer plate, post driver moil, 200 mm post cup, 2 m hoses, couplers, a tool box with spare consumables and the operator’s manual, and arrives nitrogen pre-charged.

Co-branded with HMB, supported by AR Equipment

This is a Korean HMB design. AR Equipment is HMB’s Australian distributor, and around 480 HMB breakers and post rammers are working across Australia since 2017. HMB runs its own state-of-the-art heat treatment and metallurgy department inside its factory. Final assembly, flow-bench testing, greasing and checklist are done at our Burnside workshop on the Sunshine Coast before it ships. Our workshop backs every unit with parts, servicing and repairs.

Silenced body with rubber dampeners

The cartridge is silenced, with the same top and bottom rubber dampeners as our rock breakers. The rubbers cushion the blow, so the percussion is absorbed instead of travelling straight back into the machine. That reduces wear on pins and bushes and is easier on the operator.

One 200 mm cup and a 68 mm moil

The 50-90HP post rammer uses a 200 mm post cup. On timber strainer posts it leaves a ring in the top of the post that you trim off at the end, which makes it very good for rural strainer work.

Why the 68 mm moil matters

The 50-90HP has a 68 mm moil shaft. The 68 mm moil class is what you really need to drive split posts and timber strainer posts. We have tried the smaller model, and smaller rammers marketed for rural fencing don’t have the power to push in split or strainer posts. It also handles everything smaller, including steel pickets and lighter posts.

One unit, more than one job

It is exactly the same unit as our HMB rock breaker, with a mounting plate on the side and the same stud pattern at the top as the rock breaker head. The skid steer bracket can also be swapped so the unit becomes an excavator rock breaker or post rammer.

Power and sizing

Working pressure is 1900-2200 psi. The 50-90HP needs 35-60 L/min and delivers 800 joules at 500-900 bpm with a 68 mm moil shaft and a 200 mm cup. Hose diameter is 1/2 inch. Send us your skid steer make and model and we will confirm the plate and fit before you order.

What is in the box

  • Skid steer plate
  • Post driver moil (68 mm shaft)
  • 200 mm post cup
  • 2 m hoses and couplers
  • A tool box with spare consumables
  • Nitrogen pre-charged, ready to go
  • The operator’s manual

Where a skid steer post rammer earns its keep

  • Rural fencing and strainer assemblies
  • Split post fence lines
  • Steel picket lines and lighter posts

Price

The 50-90HP post rammer is $7,990 ex GST.

In stock, well serviced and supported

In stock, plus genuine parts, and our Burnside workshop services, repairs and rebuilds what we sell. In stock, usually dispatched same day from Burnside. Most in-stock attachments leave Burnside the same day. Uncommon fitments built to order at our Burnside workshop take a little longer, and we’ll give you a date when you order.

Warranty

2-year warranty covering structural failure. The piston is covered for failure, not wear and tear. Hoses are never covered on any attachment.

Talk to us

AR Equipment Pty Ltd, Burnside QLD. Supplying attachments since 2014, with over 50 years of combined experience. Call 1300 441 121, Monday to Friday 7:30am to 5:00pm, or request a quote on this page.

Frequently asked questions

What is a skid steer post rammer?

A skid steer post rammer, also called a post driver, is a hydraulic hammer with a post cup that mounts on a skid steer plate and drives fence posts using the machine’s auxiliary hydraulics.

What skid steer suits the post rammer?

The 50-90HP model suits skid steers rated 50 to 90 horsepower. Check your machine’s auxiliary flow against the spec table, then send us your make and model and we’ll confirm the plate before you order.

Who makes the AR Equipment skid steer post rammer?

It is a co-branded AR Equipment and HMB post rammer. The design is Korean, and AR Equipment is HMB’s Australian distributor. Final assembly, flow-bench testing, greasing and checklist are done at our Burnside workshop.

What oil flow and pressure does it need?

35-60 L/min at a working pressure of 1900-2200 psi.

What is included?

A skid steer plate, a post driver moil (68 mm shaft), a 200 mm post cup, 2 m hoses, couplers, a tool box with spare consumables and the operator’s manual. It arrives nitrogen pre-charged and ready to work.

How much does a skid steer post rammer cost?

$7,990 ex GST. Freight is calculated on your quote or at checkout.

What posts can it drive?

The 50-90HP (68 mm moil) handles split posts, timber strainer posts, drill stem and rail iron, plus steel pickets and lighter posts, all with the 200 mm post cup.

Is the skid steer post rammer strong enough for split and strainer posts?

Yes. The 68 mm moil class is what you really need for split and strainer posts. We have tried the smaller model, and smaller rammers marketed for rural fencing don’t have the power to push in split or strainer posts.

What is the ring left in the top of a strainer post?

On timber strainer posts the cup leaves a ring in the top of the post. You trim it off with a saw at the end, which gives a clean finish and makes the rammer very good for rural strainer work.

Can I run it on an excavator, or as a rock breaker?

Yes. It is exactly the same unit as our HMB rock breaker, and the skid steer bracket can be swapped so the unit becomes an excavator rock breaker or post rammer. The same stud pattern at the top as the rock breaker head lets you change the head bracket.

Does it reduce wear on my skid steer?

Yes. It has the same top and bottom rubber dampeners as our rock breakers, which cushion the blow so the percussion is not sent straight back into the machine.

What warranty does it have?

2 years, covering structural failure. The piston is covered for failure, not wear and tear. Hoses are never covered on any attachment.

Is it in stock?

Yes. In stock, usually dispatched same day from Burnside.

Can I get spare parts and repairs?

Yes. Our Burnside workshop services and repairs what we sell and holds genuine parts.

How do I order or get a quote?

Use the quote form on this page or call 1300 441 121, Monday to Friday 7:30am to 5:00pm.

Need a hammer to break rock? See our HMB skid steer rock breakers.

Enquire about our 2025 product catalogue

Access our comprehensive excavator and skid steer equipment catalogue, featuring complete specifications, pricing, and technical details for our full range of attachments and machinery solutions.

Get In Touch

Please fill out the form below and one of our friendly staff will get back to you

Quick Enquiry

Free Freight banner images with SkidSteer Slasher attachment
Black Friday

FREE SHIPPING

Orders placed between now and Cyber Monday will have free shipping to your nearest depot