Mini Excavator Grab, 1–6.5T
AR Equipment mini excavator grabs are single ram hydraulic grabs for 1 to 6.5 tonne excavators. Pick up logs, rock, timber, pavers, rubble and green waste with one machine and one attachment. From $2,150 ex GST, with hoses and couplers included.
In stock, usually dispatched same day from Burnside.
Choose your size and buyCall 1300 441 121
Mini excavator grab sizes and prices
| Excavator size | Weight | Max opening | Width | Oil flow | Price (ex GST) | With soft jaws (ex GST) |
|---|---|---|---|---|---|---|
| 1–2.9T | 75 kg | 515 mm | 335 mm | 15 L/min | $2,150 | n/a |
| 3–4T | 160 kg | 705 mm | 400 mm | 20 L/min | $2,990 | $3,740 (+$750) |
| 5–6.5T | 230 kg | 820 mm | 445 mm | 30 L/min | $3,750 | $4,500 (+$750) |
All three sizes have a cylinder rated to 5000 psi (345 bar), and hoses and couplers are included. Box tynes are fitted from the 3–4T up (not on the 1–2.9T).
Single ram power in a small grab
The single large cylinder is rated to 5000 psi (345 bar) and is 14% more powerful than our previous design. Box tyne construction on the 3–4T and 5–6.5T gives strong tip strength for rock and timber. The 1–2.9T weighs just 75 kg.
Match the oil flow to your machine
Mini excavators have small auxiliary circuits, so check your machine’s auxiliary flow before you order. These grabs run on 15 L/min (1–2.9T), 20 L/min (3–4T) and 30 L/min (5–6.5T). An auxiliary hydraulic circuit is needed to open and close the jaws. Tell us your machine’s make and model and we’ll match the pins. Uncommon pin sets are built to order at Burnside.
Soft jaws option
Soft jaws are an optional extra (+$750) on the 3–4T and 5–6.5T. You choose them on the product page when you pick your size.
Where mini excavator grabs earn their keep
- Land clearing and fence lines: moving logs and loading timber
- Landscaping and retaining walls: handling rock and blocks
- Tight-access civil and building sites
- Clean-up: green waste, rubble and scrap
Designed in Australia, finished at Burnside
We design and engineer every attachment in Australia and prototype-test it on our own machinery. Final assembly is at our Burnside workshop on the Sunshine Coast, where every grab is flow-bench tested, greased and checklisted before it ships. OEM quality, backed locally with spares on the shelf and our own workshop behind every one we sell.
Warranty
2-year warranty covering cylinder and structural failure. Hoses are never covered. Full terms are in our Terms and Conditions.
Need a bigger grab?
Our single ram excavator grabs go up to 55 tonne, and our twin ram grabs suit 5T to 20T machines.
Choose your size and buyCall 1300 441 121
Mini excavator grab FAQs
What size grab suits a mini excavator?
Match it to the machine's operating weight: 1–2.9T, 3–4T or 5–6.5T. Also check your auxiliary flow: the grabs need 15, 20 and 30 L/min respectively.
What is a mini excavator grab used for?
Picking up and moving logs, rocks, timber, pavers, rubble and green waste that a bucket can't hold.
Does my mini excavator need an auxiliary hydraulic line?
Yes. A hydraulic grab needs an auxiliary hydraulic circuit on the machine to open and close the jaws. Check your machine's manual or call us on 1300 441 121.
What is the difference between a grab and a bucket thumb?
A thumb works against the bucket. A grab is its own attachment with two jaws, so you can pick up and place loads without a bucket in the way.
What are soft jaws?
Soft jaws are an optional extra (+$750) on the 3–4T and 5–6.5T grabs. Call us on 1300 441 121 if you want to know whether they suit your job.
What is included with a mini excavator grab?
The grab, hydraulic hoses and couplers.
Will it fit my machine?
Tell us the make and model and we'll match the pins. Uncommon pin sets are built to order at Burnside.
Is it in stock, and how quickly can I get one?
Most in-stock attachments leave Burnside the same day. Uncommon fitments built to order at our Burnside workshop take a little longer, and we'll give you a date when you order.
What warranty does it have?
A 2-year warranty that covers cylinder and structural failure. Hoses are never covered. Full terms are in our Terms and Conditions.
Where are AR Equipment attachments made?
We design and engineer every attachment in Australia and prototype-test it on our own machinery. Fabrication is done by our long-term manufacturing partner in China to our drawings and specs. Every attachment then goes through final assembly at our Burnside, Sunshine Coast workshop, where it is flow-bench tested, greased and put through a checklist before it ships.
Do you deliver outside Queensland?
Yes. We supply Australia-wide and deliver to your nearest depot. Call 1300 441 121 for freight to your location.
With over 50 years of combined industry experience in hydraulics, earthmoving, scrap metal, demolition and land clearing, we have first-hand knowledge of what our customers need.
AR Equipment Pty Ltd, 21 Whalley Creek Cl, Burnside QLD 4560 (Sunshine Coast). Phone 1300 441 121. Open Monday to Friday, 7:30am to 5:00pm.


